Overview
The Bushwacker 10926-07 is a cut-out style front and rear fender flare set for the Jeep Grand Cherokee. The set is designed for the vehicle to maximize off-road wheel travel and keep tire coverage, and it adds up to 1.25 in. of coverage against debris. Confirm the exact vehicle and model years before ordering, since the set is sized to the vehicle.
Cut-out flares require cutting body sheet metal to reach maximum articulation. Stainless steel hardware is used for the bolt-on installation. The rear section detaches for use with aftermarket bumpers, and the Dura-Flex 2000 TPO is 100% UV protected against chalking.
Key features
- Adds up to 1.25 in. of tire coverage against debris
- Sheet metal removal maximizes wheel articulation
- Detachable rear section for aftermarket bumpers
- OEM textured black finish that can be painted
- Dura-Flex 2000 TPO, 100% UV protected
- Made in the USA, with a Limited Lifetime Warranty
Fender flare fit and clearance
Fender flares cover tires that sit outside the factory fender line, and the right fit depends on the tire size, wheel offset and suspension height. A taller or wider tire can still rub at full articulation even with a flare fitted, so test the clearance at both lock-to-lock steering and full suspension compression before final tightening.
Painted flares need preparation to hold up. Clean the surface, use a primer suited to plastic, and let the coating cure fully before installing. The textured black finish can be painted to match the body, which gives a cleaner look where the flare meets the panel. Check the paint color on a spare piece first, since colors can look different once applied.
- Test wheel and tire clearance before drilling
- Use the stainless hardware supplied
- Paint before installing for an even color
- Re-check fasteners after the first drives
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10926-07 |
| UPC | 90689116321 |
| Vehicle | Jeep Grand Cherokee per the product name (model years not stated) |
| Position | Front and rear |
| Sold as | Set |
| Tire coverage | Up to 1.25 in. |
| Style | Cut-out, sheet metal removed, rear section detachable |
| Finish | OEM textured black, paintable |
| Material | Dura-Flex 2000 TPO, 100% UV protected |
| Warranty | Limited Lifetime |
| Made in | USA |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before cutting or ordering, since the cut lines vary by model.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting body sheet metal, so check the cut lines for your exact vehicle first. Bushwacker refers to the installation guide for the specific model for those details.
What’s included
A front and rear set of cut-out flares with stainless steel hardware. The rear section detaches and can be left off when an aftermarket bumper is fitted.














