Overview
The Bushwacker Max Coverage JK Wrangler front fender flares, part number 10045-02, are a pair of paintable pocket style flares for the 2007-2018 Jeep Wrangler (JK). The pair adds up to 11.75 inches of tire coverage from debris.
The pocket style is a Bushwacker design, and the recessed stainless steel bolts give the flares a bold look on the front fenders. The flares are built to complement oversized tires and high-clearance lift kits.
They are made in the USA from Dura-Flex 2000 TPO. The OEM matte black smooth finish can be painted to match the body, and the flares are UV protected so they will not chalk.
Bushwacker says installation needs minimal body-side drilling. The pair is for the front of the vehicle only, so the rear flares are a separate item. The four-door note applies to the rear pair only, while the front pair suits both two and four-door Wranglers.
Key features
- Adds up to 11.75 inches of tire coverage from debris
- Pair of front flares only
- Recessed stainless steel bolts in the pocket style design
- Paintable OEM matte black smooth finish
- 100% UV protected Dura-Flex 2000 TPO
- Dura-Flex 2000 TPO, which Bushwacker says is thick and flexible for durability on the trail
- Built for oversized tires and high-clearance lift kits
- Made in the USA with a limited lifetime warranty
Fender flare trail use
Fender flares cover the tire and catch mud, rocks and spray that would otherwise hit the body and the paint. On a Wrangler with larger tires or a lift, the tire moves relative to the fender at full articulation, so the flare edge and its mounting points should be checked after any change in tire size. Clearance is the main thing to confirm when a lift or wheel change is planned.
Painting pocket style flares is common on a vehicle that is driven hard. Clean the plastic with a degreaser, scuff the surface lightly, and use a paint made for flexible plastic so the finish moves with the flare. Let the paint cure fully before the vehicle sees rough trails, since fresh paint can chip.
Inspect flares after trail runs for loose bolts, torn edges and cracks at the mounting points. Retighten fasteners that have worked loose and clear mud from behind the flare, because trapped mud can hold moisture against the body. Flares that rub on a tire should be adjusted before they tear.
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 10045-02 |
| UPC | 90689108111 |
| Style | Pocket style, front pair |
| Material | Dura-Flex 2000 TPO |
| Finish | OEM matte black smooth, paintable |
| Tire coverage | Up to 11.75 inches |
| Width listed | 2 inches |
| Doors | 2 and 4-door models |
| Rear pair | Part 10044-02 |
| Warranty | Limited lifetime |
| Origin | Made in the USA |
Vehicle fitment
This pair fits the JK Wrangler from 2007 to 2018, in both two-door and four-door bodies. It does not fit the TJ, LJ or JL Wrangler generations.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation needs minimal body-side drilling. The rear pair is sold separately as part 10044-02.
What’s included
A pair of front flares.
Not included: the rear pair, part 10044-02, which is listed separately.















