Overview
The Bushwacker 40009-11 is a pair of cut-out front fender flares rated for 5 inches of width and coverage. Bushwacker lists them for 1988–1999 Chevrolet and GMC C1500, C2500, C3500, K1500, K2500 and K3500 trucks and their Suburban models, along with the 1992–1994 Chevrolet Blazer, the 1995–1999 Chevrolet Tahoe and the 1992–1997 GMC Yukon.
The cut-out design removes body sheet metal so the wheel can travel further and the flare can cover larger tires. Each flare is individually designed for its truck. It is made from thick Dura-Flex 2000 material with UV protection against chalking. The matte black finish can be left as is or painted.
The rear pair is part 40010-11, so order that part for the rear of the same truck.
Key features
- Cut-out front flare for maximum wheel articulation
- 5 inches of width and coverage
- Thick, warp-proof Dura-Flex 2000 material
- UV protection against chalking
- Pro-grade matte black finish, paintable
- Sold as a pair
Rivets and trimming on older bodies
Riveted cut-out flares depend on the condition of the fender metal around the cut. Older sheet metal can be thin or corroded near the wheel opening, so inspect it before setting any rivets. Clean rivet holes and use a sealant that remains flexible, since the trimmed panel will move slightly with the body.
Trim lines should be planned with the wheel at full lock and the suspension at full droop. Taking a little metal at a time is safer than a large first cut, and the trimmed edge can always be refined. Keep the rivet pattern away from the bodywork edge where possible, and check the fit again after the first trail session.
- Inspect fender metal before riveting
- Trim in small steps
- Use flexible sealant on rivet holes
Specifications
| Brand | Bushwacker |
|---|---|
| Part number | 40009-11 |
| Position | Front |
| Quantity | Pair |
| Width and coverage | 5 inches |
| Material | Dura-Flex 2000 |
| Installation | Requires cutting body sheet metal; riveted |
| UPC | 90689103369 |
Vehicle fitment
The flare fits Chevrolet and GMC C/K pickups and Suburbans from 1988 to 1999, the 1989 Chevrolet R2500, the 1992 to 1994 Chevrolet Blazer, the 1995 to 1999 Chevrolet Tahoe and the 1992 to 1997 GMC Yukon.
The flare covers the Chevrolet and GMC models above only, so Toyota Pickup and 4Runner applications fall outside that coverage. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The cut-out design requires sheet metal trimming, and the flare mounts with rivets. Follow the installation steps for your specific model and plan the cutting before starting.
What’s included
One pair of front cut-out flares. The rear pair is part 40010-11.








