Overview
The Go Rhino BR20 Light Plate is a textured black rear light mounting plate made for use with the BR20 rear replacement bumper, part number 28173T. It is a mounting accessory, so it works only in combination with that bumper and the lights you intend to mount.
Mounting lights on a rear bumper
Rear light plates carry lights in a spot that takes road spray, mud and branches, so the plate and its fasteners need regular attention. Before installing lights, plan the wiring route from each light position to the vehicle’s power source. Keep leads away from the tailgate hinge area and any moving latch hardware, and use grommets wherever wires pass through panels.
Lights on a plate add weight at the back of the vehicle, which can affect how the rear end sits and how the tailgate closes. Check the mounting bolts after the first few trips and whenever the plate has taken a hard hit. Look for cracks around fastener holes, rust on bolt heads and any sag in the plate. Replace worn parts before they fail on the road, and keep a spare set of fasteners in the vehicle.
Specifications
| Brand | Go Rhino |
|---|---|
| Finish | Textured black |
| Position | Rear |
| Compatible bumper | BR20 rear replacement bumper, PN 28173T |
| UPC | 887753087188 |
Vehicle fitment
Fitment depends on the BR20 rear replacement bumper, part number 28173T, so confirm that bumper fits your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Verify all hardware is present before you begin the installation.
Not included: The BR20 rear replacement bumper and any lights to be mounted on the plate.









