Overview
The Go Rhino Center Hood Mount for Dual 6-inch LED Bars (part ORP732060T) holds two 6 inch single row LED light bars across the center of the hood, one on the driver side and one on the passenger side. It fits 2018–2019 and 2021–2026 Jeep Wrangler JL and JLU.
It is designed for setups that need more forward facing light. The mount is 3/16 inch cold rolled steel with a black textured powder coat, and it can also be placed on the hood hinge, lower A-pillar, upper cowl, hood clamp or hard top.
Key features
- Holds two 6 inch single row LED bars across the center of the hood
- One bar on the driver side and one on the passenger side
- 3/16 inch cold rolled steel with black textured powder coat
- Installs without cutting or drilling
- Low profile design for forward facing light setups
Wiring and light selection
Two bars on one hood mount give a wider pool of light than a single bar, but the pair should match in beam pattern and color temperature so the light looks even. Mixing a spot bar with a flood bar can make the lighting look uneven at the edges of the beam. Choose bars with the same mounting hole spacing so both sit square on the bracket.
Plan the power side before mounting. A single fused relay can feed both bars, and the wire gauge should suit the combined draw. Route both harnesses together along the hood’s existing wiring path and keep clear of the hinge pivot. Leave slack so the hood can open fully without pulling on the connectors.
Over time, bolts on a hood-mounted pair loosen from vibration, and road spray can corrode exposed fasteners. Check the bracket welds, bolt tightness and lens seals on a regular schedule, and replace any cracked lens before water gets inside. A simple inspection after each rough trip keeps both bars aimed correctly.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | ORP732060T |
| Light size | Two 6 inch single row LED bars (sold separately) |
| Material | 3/16 inch cold rolled steel |
| Finish | Black textured powder coat |
| Mount location | Hood mount |
| Color | Black |
| Finish warranty | 5 year |
Vehicle fitment
It fits 2018–2019 and 2021–2026 Jeep Wrangler JL models: 2-door Rubicon, Sport and Sport S, and 4-door Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S. The 2020 model year is not covered, and JK and older Wrangler models are outside this fitment.
The JK generation and older Wrangler models are outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Keep the wiring for both bars on a fused relay, and look up local road-use rules for auxiliary lighting before driving with it lit.
What’s included
The mounts are listed without the bars. Not included: the two 6 inch single row LED bars, which are sold separately.
