Overview
The Borla Pro XS Muffler, part number 40359, is a straight through stainless steel muffler with 3-inch tubes, an offset inlet and a centered outlet. It is universal fit, and no particular vehicle is named.
Straight-through mufflers route exhaust along a more direct path than baffled designs. Check the 3-inch tube size and port layout first, since the feel and sound depend on the whole system.
Key features
- Straight through design
- Offset inlet
- Centered outlet
- 3 in inlet and outlet tubes
- Stainless steel material
- Universal fit label
Tuning the exhaust note
A straight-through design lets exhaust move with fewer turns, which tends to give a more open tone than a baffled unit. The trade-off is that the sound can carry further at highway speeds, so many drivers pick the tone first and then match the pipe size. Tube diameter, muffler length and the position of the catalytic converter all shape the final result.
If you are upgrading the rest of the exhaust, consider resonators and pipe sections that match the 3-inch tube size. Replacing hangers and gaskets at the same time keeps the system stable and helps avoid leaks at the joints. Stainless steel resists rust well, but the surrounding pipes and clamps still need periodic inspection.
- Choose pipe sections in the same diameter
- Replace worn hangers before they fail
- Check joints after the first heat cycles
Specifications
| Brand | Borla |
|---|---|
| Part number | 40359 |
| UPC | 70000208653 |
| Muffler type | Straight through |
| Inlet location | Offset |
| Outlet location | Centered |
| Tube size (inlet/outlet) | 3 in / 3 in |
| Material | Stainless steel |
| Fitment type | Universal Fit |
Vehicle fitment
Measure your existing pipe diameter and port layout before fitting this muffler, since its 3-inch tubes and offset inlet must match.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check how the offset inlet meets the centered outlet on your system before fitting, since the routing depends on both.
What’s included
Pack a few spare clamps and gaskets, and check each part against your installation before starting.









