Overview
The Borla Universal Performance Muffler, part number 400238, is a baffled stainless steel muffler with a 3-inch offset inlet and an offset outlet. It is universal fit, so it is not tied to a single vehicle.
Baffled mufflers are built to deliver a controlled, signature exhaust sound. Because no vehicle is named, check the 3-inch tube size and offset port positions against your existing exhaust before ordering.
Key features
- Baffled muffler design
- Stainless steel construction
- 3 in inlet and outlet tubes
- Offset inlet and offset outlet
- Universal fit label
Baffle design and flow
Baffles inside a muffler slow and redirect exhaust so the sound is quieter and more even. That is why baffled designs often feel more subdued than straight-through units, although the exact tone depends on pipe diameter and the rest of the exhaust. Offset ports change how the pipes must bend, which can affect both sound and clearance.
Choosing a baffled muffler means weighing a controlled tone against the extra internal restriction that baffles add. Before buying, look at the whole system, including catalytic converter position, resonator use and tailpipe length. Inspect hangers, heat shields and joints at the same time, because a mismatched exhaust can rattle or leak at the connections.
- Mark pipe centerlines before cutting
- Check clearance to the floor pan and fuel lines
- Replace worn gaskets at every joint
Specifications
| Brand | Borla |
|---|---|
| Part number | 400238 |
| UPC | 808422002387 |
| Muffler type | Baffled |
| Inlet location | Offset |
| Outlet location | Offset |
| Tube size (inlet/outlet) | 3 in / 3 in |
| Material | Stainless steel |
| Fitment type | Universal Fit |
Vehicle fitment
It is universal fit, so it is not tied to one year or model. Compare its 3-inch tubes and offset ports with your piping first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the pipe alignment and clearance before fitting, since offset ports can change how the pipes must bend.
What’s included
Have clamps, hangers and gaskets ready that match your existing piping before starting.









