Overview
The MBRP M2050 is an aluminized steel straight-through muffler with a 5-inch inlet and a 5-inch outlet, both centered. It is universal fit, with no specific vehicle year, make or model attached.
The muffler is designed to deliver maximum performance with minimum sound. It is also known by the number MBRM2050.
Key features
- Straight-through design
- Aluminized steel body
- 5-inch inlet and 5-inch outlet, both centered
- Designed for maximum performance with minimum sound.
Straight-through muffler basics
A straight-through muffler uses a perforated core and sound-absorbing material to reduce noise while letting exhaust pass with less restriction than a chambered design. Aluminized steel resists rust better than plain steel, but the seams and bottom of the can still corrode with road salt and moisture. Inspect the body after winter driving and check for loose or sagging mounts.
Because the inlet and outlet are both centered, the muffler sits on the centerline of many exhaust runs, which makes alignment straightforward. Keep the pipes supported so the weight of the muffler does not stress the joints. Replacing the hangers at the same time as the muffler is a good habit, since old rubber can crack and cause rattles.
- Check the body for rust and pinholes
- Support the pipe to reduce joint stress
- Replace cracked rubber hangers
Specifications
| Brand | MBRP |
|---|---|
| Part number | M2050 |
| UPC | 882963100757 |
| Muffler type | Straight through |
| Material | Aluminized steel |
| Tube size (inlet/outlet) | 5 inches / 5 inches |
| Inlet location | Centered |
| Outlet location | Centered |
| Fitment | Universal fit |
Vehicle fitment
MBRP gives this muffler as universal fit, with no vehicle years, makes or models named. Because the tube size is 5 inches, confirm your exhaust pipe diameter matches before you choose it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your exhaust pipe to confirm it is 5 inches in diameter before fitting this muffler. The centered inlet and outlet mean pipe alignment should be checked during fitting.
What’s included
Check the package contents against your installation before starting, including clamps and hangers.
Not included: Have mounting hardware ready before starting the install.









