Overview
The Body Armor 5125 roof rack adapters clamp onto the 2-inch side tubes of a Body Armor roof rack base. They let you attach Thule or Yakima crossbars and accessories without drilling.
The adapters clamp to the side tubes and slide along them to the position you need. They fit a 2-inch diameter tube, including pick-up bed rails and roof racks from other brands.
Key features
- Clamps onto a 2-inch tube
- Position anywhere along the side tubes
- No drilling required
- Works with Thule and Yakima accessories
- Textured black finish
- Designed to fit all Body Armor roof racks
Clamp checks and accessory load
A clamp-on adapter carries the weight of whatever it holds, so the grip on the tube matters most. Tighten each clamp evenly and recheck it after the first short drive, since vibration can shift a clamp that was set loosely. Place adapters where the tube is straight and free of dents, because a bent section gives an uneven grip.
Accessory mounts vary by brand, so confirm each crossbar or carrier uses the matching add-on kit before loading. Heavy loads such as roof top tents need extra care around the tube and clamp, and they should be checked more often. Keep the tube clean and free of grease at the clamp points so the surface holds the adapter well.
- Tighten clamps evenly
- Recheck after the first short drive
- Keep clamp contact points clean
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Model number | 5125 |
| UPC | 859909002130 |
| Material | Steel |
| Finish | Textured black |
| Tube fit | 2-inch diameter |
| Drilling | Not required |
| Roof rack type | Roof rack accessories |
Vehicle fitment
These adapters are not vehicle-specific. They clamp to a 2-inch tube, so the fit depends on the tube and the Body Armor base, not on a model year.
Check your tube diameter before fitting, since the adapters are designed for 2-inch tubes. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Thule accessories need the Tacker II Kit (PN TK13) and the 430 Foot pack. Yakima accessories need Landing Pad 6 (PN 00226) and Control towers (PN 00212). Check that each clamp is secure before loading a bike, kayak or roof top tent.
What’s included
The adapters are the included item. Check the package contents against your installation before starting.
Not included: The Body Armor roof rack base, Thule or Yakima crossbars, and the Tacker II, Landing Pad and Control tower kits named above.









