Overview
The Body Armor 4×4 JK-6124-2 is a steel roof rack base for 2 and 4-door models, made for Over-Lander Jeep owners who carry gear on the roof. It is intended for use with part number JK-6124-1. Confirm your vehicle’s year, model and trim before ordering.
The front uprights attach to the A-pillars using the four existing bolts on each side. The rear uprights can mount to the frame rails with no drilling, or near the taillights into the body. Bikes, kayaks or a roof top tent can be carried with 5125 adapters that work with Yakima towers and crossbars.
Key features
- Front crossbar with four welded light tabs for auxiliary lights
- Rear bar with two tabs for rear-facing lights
- Access holes in the crossbars for wiring under the light tabs
- Internal wire routing through holes in the elbow joints
- Front uprights use the four existing A-pillar bolts on each side
- Rear uprights can mount to the frame rails with no drilling
- Steel tube with dual process textured black powder coat finish
- 5125 adapters for Yakima towers and crossbars
Planning a roof rack setup
A roof rack base is only as good as its mounting plan. Decide between frame and body mounting before fitting the uprights, because the frame route involves changing the rear bumper and the body route means drilling. Take time to test the rack position on the roof, so crossbars sit where the load will be balanced and clear of the windshield and doors.
Weight on a roof rack changes handling, especially on rough trails, so load the rack evenly and secure every item with straps. Check the mounting hardware and welds after the first trips and after heavy off-road use. Auxiliary lights on the tabs add weight and need stable wiring, so route the cables inside the tubes before the final assembly.
- Choose the mounting method first
- Load evenly and strap down items
- Inspect bolts after rough trails
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | JK-6124-2 |
| UPC | 859909002895 |
| Material | Steel tube |
| Finish | Dual process textured black powder coat |
| Drilling | Drilling is required for the body mount option |
| Fitment type | Direct Fit |
Vehicle fitment
It is built for 2 and 4-door models and is paired with the JK-6124-1. Check your year, model and trim against the covered vehicles before buying.
Confirm the year, model and trim match before drilling, and check the mounting plan against your vehicle first.
Installation notes
Drilling is optional: the rear uprights can mount to the frame rails with no drilling, while mounting near the taillights requires drilling four holes into the body. Mounting to the frame requires modifying the factory rear bumper.
Route auxiliary and rear-facing light wiring through the access holes and internal elbow passages before final mounting. Drilling and bumper modification are permanent, so settle the mounting plan first.
What’s included
Includes side and cross tubes.
Not included: Auxiliary lights and wiring for the welded tabs. Check the package contents, including whether the 5125 adapters are needed, against your installation before starting.









