Overview
The Body Armor 4×4 Mega D-Ring, part number B/A5141-M, is a machined 7/8 inch D-ring shackle rated at 18,000 lbs. for off-road recovery work. D-ring shackles give a recovery strap or winch line a secure attachment point on the vehicle. It is universal fit, so it is not tied to one year, make or model.
Body Armor 4×4 makes durable off-road gear for enthusiasts. The machined design is built to take hard use while adding a finished look to the vehicle.
Key features
- Machined finish with a 7/8 inch D-ring size
- 18,000 lbs. weight rating
- Universal fit, so it is not limited to one vehicle
- Built for hard use, with a finished look on the vehicle.
Using a D-ring safely
A D-ring is the connection point between your recovery gear and the vehicle, so it deserves the same attention as the strap or winch line. Seat the pin fully and make sure the shackle body sits square on the mounting point rather than at an angle. Side loads reduce the working strength of any shackle.
Machined steel has clean surfaces that show wear and deformation clearly. Check the body, pin and threads after each use, and wipe off grit so the mating surfaces seat properly. Store the D-ring dry and away from road salt to slow corrosion on the pin and threads.
- Seat the pin fully before loading
- Keep the load in line with the body
- Replace any D-ring with visible deformation
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | B/A5141-M |
| Finish | Machined |
| Size | 7/8 inch |
| Weight rating | 18,000 lbs. |
| Fitment | Universal Fit |
Vehicle fitment
This D-ring is not vehicle-specific and works as universal fit. Use the 18,000 lbs. rating and mounting point to decide whether it suits your recovery setup.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One D-ring is included.










