Select your vehicle
-13%

Smittybilt 3/4-inch D-Ring Shackle with Isolator (Red) – 23047R

Smittybilt

Shop Smittybilt D-Ring Shackles on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Smittybilt 3/4 inch D-ring shackle with isolator in red, part number 23047R
  • Isolators protect the bumper finish and reduce shackle noise
  • 4.75 ton weight rating

Description

Overview

The Smittybilt 3/4 inch D-ring shackle with isolator in red, part number 23047R, is a 4.75 ton recovery shackle. It comes complete with D-ring isolators that help protect the bumper finish and reduce the clanking noise of the shackle against the bumper.

Smittybilt D-ring shackles are recovery rigging points that work with its XRC and SRC Series bumpers and other off-road bumpers. The finish on this version is red, and zinc and black are also offered. The isolators are supplied with the D-ring.

Key features

  • D-ring isolators included
  • Protects the bumper finish
  • Reduces shackle clanking noise
  • 4.75 ton weight rating
  • 3/4 inch size
  • Red finish

Protecting the bumper and rigging

Isolators sit between the shackle and the bumper, so their job is to absorb contact and vibration that would otherwise chip paint and wear the bumper surface. Over time the isolator itself wears, especially where a shackle is left hanging and swings during travel. Inspect the rubber or polymer for cuts, flattening and cracks, and replace it when it no longer holds the shackle snug against the mount.

A shackle that rattles on the bumper during daily driving is often the first sign that the isolator has worn or was not seated correctly. Clean the mounting area so the isolator sits flat, and tighten the pin so it does not work loose. Keep the shackle pin lightly lubricated to prevent corrosion and make it easier to remove after a recovery.

Specifications

Brand Smittybilt
Part number 23047R
Product type D-ring shackle with isolator
Size 3/4 inch
Weight rating 4.75 ton
Finish Red
Included D-ring isolators

Vehicle fitment

This shackle is not tied to a specific vehicle, and no model years are named. Match its 4.75 ton rating and 3/4 inch size to your recovery rigging before buying.

Check the isolator fit on your bumper before ordering.

What’s included

The D-ring shackle with its isolators.

Questions & Answers

What do the isolators do?

The isolators help protect the bumper finish and reduce noise from the shackle clanking on the bumper. They are included with the shackle.

Is an isolator included?

Yes. The D-ring comes complete with its isolators, so no separate isolator needs to be bought with this part when you order it.

What is the weight rating?

The weight rating is 4.75 tons. Keep the recovery load within that limit and use rigging rated for at least the same load.

How do I know when an isolator needs replacing?

Replace it when the isolator is cut, flattened or cracked, or when the shackle starts rattling against the bumper. Check the isolators after each trail trip, since they are the part most likely to wear. Confirm fit for your bumper before buying replacements.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Smittybilt D-Ring Shackles on Amazon