Overview
The Rugged Ridge 11235.05 is a pair of 3/4-inch stainless steel D-ring shackles rated to a 9,500 lb working load limit (WLL) for vehicle recovery. D-ring shackles give the looped ends of straps and snatch blocks a secure connection point.
It is universal fit, so it is recovery gear rather than a part sized for a particular year, make or model.
Key features
- Stainless steel construction
- 3/4-inch pin size
- 9,500 lb working load limit (WLL)
- Sold as a pair for connecting straps and snatch blocks
Sizing a shackle to your strap
A shackle works best when its eye and pin suit the strap or snatch block it connects. A pin that is too small for the eye can bind or bend, while a pin that is too large may not seat cleanly. Match the pin size to the hardware it will hold before the pull begins, not after.
Stainless steel resists corrosion well in wet and salty conditions, which helps a shackle that sits in a recovery kit for long periods. It does not change the rated load, so keep every pull within the working load limit and avoid knots or sharp bends in the strap at the shackle.
- Match the pin to the strap eye
- Keep the shackle body in line with the pull
- Store the kit dry between trips
- Inspect the pin and threads before use
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.05 |
| UPC | 804314255923 |
| Material | Stainless steel |
| Pin size | 3/4 inch |
| Working load limit | 9,500 lb (WLL) |
| Quantity | Pair |
Vehicle fitment
No specific vehicle is listed. This is a universal recovery accessory, so match the 3/4-inch pin to the eye of your strap or snatch block and keep every load within the 9,500 lb rating.
Installation notes
Never load a shackle beyond its working load limit, and confirm the pin is fully closed before each recovery pull.
What’s included
One pair of 3/4-inch stainless steel D-ring shackles from Rugged Ridge.









