Overview
The Body Armor 4×4 Clevis D-Rings, part number 3202, are black powder coat clevis D-rings in 3/4 inch size, supplied as a pair. They are intended for Body Armor bumpers with 3/4 inch welded mounts.
Using D-rings for recovery
D-rings give a point to attach a shackle or strap when you need to recover a vehicle or position a winch line. The strength of the whole setup depends on the rings, the shackles and the mounting point on the bumper, so every link should be rated for the load you expect to apply. A ring is only as strong as the weld or bolt that holds it.
Before a trail trip, inspect the welds around the mounts for cracks and check that the ring moves freely in its clevis. Powder coat can chip where the ring rubs against shackles, so touch up exposed metal to slow corrosion. Avoid side-loading a D-ring, and keep the pull in line with the ring to reduce stress on the mount.
- Match shackle ratings to the recovery load
- Inspect welds and mounts before each trip
- Keep the pull in line with the D-ring
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | 3202 |
| UPC | 859909001669 |
| Finish | Black powder coat |
| Size | 3/4 inch |
| Quantity | Pair |
Vehicle fitment
No vehicle years, makes or models are named. The stated fit is Body Armor bumpers with 3/4 inch welded mounts, so check your bumper’s mounts before use. A universal fit label also appears, but the bumper mount is the stated requirement.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of clevis D-rings is included.









