Overview
The Body Armor 4×4 5 Series 18-inch LED Light Bar, part number 50018, is a single row LED light bar with a spot beam, universal fit. It is 18 inches long, and the spot beam is the only beam pattern given for it.
Key features
- 18 inch single row LED bar
- Spot beam
- Part number 50018
Mounting a long light bar
A long light bar puts more leverage on its mount than a pod light does. An 18 inch bar flexes at the middle if it is held at only two points, and that flex shows up as vibration, loose fasteners and a bar that drifts out of aim. Pick a bracket that spans the bar’s length and attaches to a rigid part of the vehicle, such as a frame section or a reinforced bar.
Spot beams reward careful aim. A tight beam throws light far down the trail, so small changes in angle make a big difference at distance. Set the aim on level ground, mark the position, and check it after the first few trail runs. Keep the wiring routed away from the bracket and moving parts, and secure the loom at intervals so it does not chafe.
- Use a bracket that spans the full bar length
- Tighten fasteners after the first trail runs
- Mark the aim position on the bracket
- Secure the wiring loom at regular intervals
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | 50018 |
| Series | 5 Series |
| Length | 18 inch |
| LED row configuration | Single row |
| Beam pattern | Spot |
Vehicle fitment
It is a universal fit light bar, so it is not built for one vehicle. An 18 inch bar needs a bracket that holds its length, so check the mount and placement on your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a fused relay and check local rules on light bars before using the bar on public roads. Plan the mounting and wiring before starting.
What’s included
One 18 inch single row LED light bar. Check the package contents against your installation before starting, and plan for mounting and wiring hardware.










