Overview
The Body Armor 4×4 40050 is a 50 in. 4 Series LED light bar with a dual row layout, 4D optics and a spot/fog beam. It is Universal Fit, so no specific vehicle is named.
Because no vehicle is named, the 50 in. length needs to suit your own mounting surface.
Key features
- Dual row LED layout
- 4D optics
- Spot/fog beam pattern
- Wiring harness and switch are included
Wiring and switching a light bar
A 50 in. light bar draws enough current to need a proper feed, so run it from a fused power source rather than a loose accessory circuit. A relay keeps the switch wiring light and lets the bar take power directly from the battery. Route the harness along existing body lines, away from heat, moving parts and sharp edges, and secure it at regular points.
Switch placement affects daily use. Mount the switch where it can be reached without looking, and make sure the bar cannot turn on while the engine is off unless you intend it to. Check the rules where you drive before using the bar on public roads, since aiming and use of auxiliary lights vary by area.
- Run the feed from a fused power source
- Use a relay to keep switch wiring short
- Route the harness away from heat and moving parts
- Check local rules before public road use
Specifications
| Brand | Body Armor 4×4 |
|---|---|
| Part number | 40050 |
| UPC | 859909003465 |
| Length | 50 in. |
| LED layout | Dual row |
| Optics | 4D |
| Beam pattern | Spot/Fog |
Vehicle fitment
Universal fit with no vehicle-specific listing. Measure the mounting area for a 50 in. bar and plan the wiring route on your own vehicle first.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan the harness route to a fused power source, and check local rules for auxiliary lights before using the bar on public roads.
What’s included
- Body Armor 4×4 4 Series LED light bar, 50 in.
- Wiring harness
- Switch









