Overview
The Black Rhino Stadium 16×8 in Bronze, part TSW1680SDM-06140Z12, is a rotary forged aluminum wheel with ten spokes, a deep step lip and a flat face. It measures 16 inches by 8 inches with a 6 on 5.5 bolt pattern, offset -10, center bore 112 and backspacing 4.11, and belongs to the Stadium series.
The Stadium has a clean, minimal spoke design with a flat face profile meant to keep strength up while limiting weight. It is load rated to 2,450 lbs per wheel. A Toyota Racing Development center cap fits 6×139.7 sizes, and the standard finish is Matte Black, with Bronze offered only for those sizes.
Rotary forging shapes the rim under high pressure while the wheel spins at high speed. The result is a lighter rim than a typical cast wheel, with the weight saving concentrated in the outer rim.
Key features
- Ten-spoke Stadium design with a deep step lip.
- Flat face profile for strength with reduced weight.
- Rotary forged aluminum construction.
- Load rated to 2,450 lbs per wheel.
- 16 inch by 8 inch size with offset -10 and backspacing 4.11.
- Center bore 112.
- Bronze finish; the standard finish for all sizes is Matte Black.
- Toyota Racing Development center cap fit noted for 6×139.7 sizes.
Load rating and tire choice
A load rating shows how much weight a wheel can carry, and it should be compared with the vehicle’s axle load and the tire’s load index. A wheel rated for more than the tire can carry still needs a tire that matches the vehicle’s weight and use. Wheel and tire loads should be planned together, especially on heavier trucks or when carrying gear.
Forged construction and a flat face profile can make a wheel lighter, but strength comes from the design and material together. Inspect the rim and spokes after rough trail use or curb strikes, looking for cracks, bends or fine lines near the spoke roots. Center bore and seat type also matter, so verify both before mounting.
- Compare the wheel load rating with the tire load index
- Check the seat style of the lug hardware
- Inspect spoke roots after curb strikes
- Retorque the nuts after the first few drives
Specifications
| Brand | Black Rhino Wheels |
|---|---|
| Part number | TSW1680SDM-06140Z12 |
| Wheel diameter | 16 inches |
| Wheel width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Offset | -10 |
| Center bore | 112 |
| Backspacing | 4.11 |
| Style | Spoke |
| Series | Stadium |
| Finish | Bronze |
| Construction | Aluminum, rotary forged |
| Load rating | 2,450 lbs per wheel |
Vehicle fitment
Fitment is not confirmed for any vehicle or model year. Check the bolt pattern and center bore against your vehicle before buying.
Bronze is offered only for 6×139.7 sizes, so check the bolt pattern and center bore against your hub before ordering. Confirm fit for your vehicle’s year, model and trim before buying.
Installation notes
Center bore 112 and the 6 on 5.5 pattern must match your hub, so check both before mounting. Offset -10 and backspacing 4.11 change how the wheel sits against brake calipers and fenders, which is worth measuring before the tire goes on. Use lug hardware suited to this wheel’s seat design, and keep the 2,450 lbs per wheel rating in mind when choosing tires.
What’s included
The wheel itself is what comes with it. A center cap is a fit reference only and is not included.
Not included: Tires, lug hardware and center caps are not part of this wheel.










