Overview
The Bilstein 24-188203 is a rear 46mm monotube gas charged shock absorber from the 4600 Series, finished in yellow. It fits the 1979-1982 Dodge D50, the 1983-1991 Dodge Ram 50 and the 1979-1995 Toyota Pickup, with trims covered in the fitment section below.
In a monotube shock, the oil and gas charge share one tube, separated by a dividing piston. The outer surface of the body sheds heat from the oil, and the piston lets the oil expand as it warms, which helps damping stay steady as temperatures climb.
The design has fewer parts than conventional twin tube shocks, and its seamless tube adds strength and helps dissipate heat. Owners of these compact pickups who want a rear shock in this 46mm monotube class can compare the specifications below.
Key features
- 46mm monotube body with gas charge
- Dividing piston separates the oil from the gas and allows the oil to expand
- Seamless tube construction adds strength and helps dissipate heat.
- Extrusion process gives tight peak-to-valley tolerance and consistent wall thickness.
- Compression and rebound damping tuned independently at the piston head
- Fewer parts than twin tube and road sensing designs
- Yellow finish with a heavy duty rating
Replacing a worn rear shock
A rear shock on a small pickup works through a wide range of loads, from an empty bed on washboard roads to a loaded bed on pavement. Over time the piston seals and valving wear, and the damper stops controlling the rebound, so the body bounces after bumps. A monotube body helps dissipate heat, but a shock that runs hot for long stretches still loses its control sooner.
When replacing a rear shock, inspect the upper and lower bushings, the mounting bolts and the spring perches at the same time. A new shock on worn bushings will not hold its geometry. Keep the position and body size the same as the shock being removed, and confirm the axle side before ordering.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-188203 |
| UPC | 651860642284 |
| Former part number | BILF4-B46-0257-H1 |
| Shock series | 4600 Series |
| Position | Rear |
| Tube size | 46mm |
| Shock type | Monotube, gas charged |
| Fitment type | Direct Fit |
| Lift height | 0 in. lift/drop |
| Finish | Yellow |
Vehicle fitment
It fits the 1979-1982 Dodge D50 (Base, Custom, Royal, Sport), the 1983-1991 Dodge Ram 50 (Base, Custom, LE, Royal, SE, Sport) and the 1979-1995 Toyota Pickup (Base, DLX, SR5, SR5 Turbo).
Other Dodge and Toyota models, years and trims not named here are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber. Mounting hardware and bushings are not included, so check your installation needs before starting.









