Overview
The Baja Designs Squadron-R Pro Fog Pocket Kit, part number 447067, places Squadron-R Pro LED lights into the factory fog pockets of the 2018-2022 Jeep Wrangler JL Sport and Sport S with the plastic bumper. It is the higher-output option in the Squadron-R line and fits two and four door JL models.
Each Pro light uses four LEDs producing 4,900 lumens at 40W and 2.90A. The cast aluminum body is hard anodized and powder coated, and each light measures 3.07 x 2.77 x 3.07 in. The LED life expectancy for the lights is 49,930 hours.
Key features
- Pair of Squadron-R Pro LED lights
- 4,900 lumens per light from four LEDs
- Brackets that use the stock mounting points
- Wire adapters for the OEM connectors
- Hard anodized, powder coated cast aluminum housing
- LED life expectancy of 49,930 hours
Power demand and the fog circuit
Higher-output LED lights draw more current than standard fog lights, so the factory fog circuit carries more load. Most factory circuits handle that without trouble, but the fuse and connectors should be checked after installation, especially on vehicles with other accessories on the same circuit. A poor connection that runs warm is easy to miss until the lights start to flicker.
Pro-level lights are a good match for drivers who spend long hours on dark trails and want more light at the front of the vehicle. The trade-off is heat and current. Keep wiring tidy, avoid stacking extra accessories on the fog circuit, and recheck the connections after rough trips where water or mud may have reached them.
- Check the fog fuse after installation
- Avoid adding accessories to the same circuit
- Look for warm or discolored connectors
- Recheck connections after rough trips
Specifications
| Brand | Baja Designs |
|---|---|
| Part number | 447067 |
| UPC | 819314026947 |
| Light model | Squadron-R Pro |
| LEDs per light | 4 |
| Lumens | 4,900 per light |
| Wattage / amps | 40W / 2.90A |
| Dimensions | 3.07″ x 2.77″ x 3.07″ |
| Housing | Hard anodized and powder coated cast aluminum |
| LED life expectancy | 49,930 hours |
| Fitment | 2018-2022 Jeep Wrangler JL, Sport and Sport S |
Vehicle fitment
The kit covers 2018-2022 Jeep Wrangler JL Sport and Sport S models with the plastic Sport/Sport-S bumper. The range follows the JL generation, which begins with the 2018 model year.
Metal Rubicon bumpers are not covered by this kit, and the Sahara version uses part number 447071. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The factory wiring stays in use: the wire adapters plug into the OEM connectors, so no splicing or soldering is needed. Confirm the bumper is the plastic Sport or Sport-S type first, since the brackets are built for that bumper.
What’s included
A pair of Squadron-R Pro LED lights, two sets of Jeep JL mounting brackets, plug and play wiring connectors, and mounting hardware.
