Overview
The Baer Brakes Track4 front brake kit 4261291R is a red 4-piston disc brake system for Ford and Mercury cars from 1970 to 1974 with OE drum brake spindles. Its T4 caliper clamps a 13 inch slotted, drilled rotor with a zinc plated finish, and the kit uses FMSI pad D0749. It fits the Ford Falcon, Fairlane, Maverick, Mustang and Torino and the Mercury Comet, Cougar, Cyclone and Montego.
Owners who want a red front disc upgrade for a classic Mustang or Torino will find the full specifications below. The hubs are billet aluminum with bearings packed in Redline synthetic grease, and the kit comes with mounting brackets, stainless braided hoses and hardware. Confirm the drum spindle setup against the fitment section before you order.
Key features
- Red T4 caliper with four stainless steel pistons
- Staggered pistons help even out pad wear
- Dual seals for dust, weather and pressure
- CNC machined forged or billet aluminum components, U.S.-sourced
- Stainless steel abutments and noise suppression clips
- 1-piece slotted, drilled rotor with zinc plated surface
- Billet dust caps on the hubs
- Braided steel hoses, DOT approved
Pads and rotor wear
Brake pads and rotors wear as a pair, and the pad compound affects how quickly the rotor surface changes. A pad that is too hard can scar a rotor, while a pad that is too soft can fade under long downhill runs. When replacing the rotor, check the pad thickness and the backing plate, since mixing an old pad with a new rotor can produce uneven contact and noise during the first stops.
Slotted and drilled rotors are designed to shed gas and debris from the pad surface, and they are often fitted to cars that see spirited driving. Those openings can also collect dust and grit, so they need periodic cleaning. Look for hairline cracks radiating from the drilled holes, along with a lip or ridge on the outer edge of the rotor, since either can mean the rotor should be replaced rather than resurfaced.
- Measure pad thickness at each inspection interval
- Bed in new pads with a series of moderate stops
- Check rotor runout before final assembly
- Replace pads in axle pairs to keep braking even
- Clean the caliper slides whenever pads are removed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261291R |
| UPC | 844165043546 |
| Caliper | T4, 4-piston, fixed, red |
| Pad type | FMSI D0749 |
| Rotor | 1-piece, vented, slotted, drilled, zinc plated |
| Rotor material | Iron |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Hose | Braided steel, DOT approved |
| Hubs | Billet aluminum |
| Template | Q082H |
| Emission code | 6 |
| Axle | Front |
Vehicle fitment
Covered vehicles are 1970 Ford Falcon, 1970 Ford Fairlane, 1970-1974 Ford Maverick, 1970-1973 Ford Mustang, 1970-1971 Ford Torino, 1971-1974 Mercury Comet, 1970-1973 Mercury Cougar, 1970 Mercury Cyclone and 1970-1971 Mercury Montego, each with OE drum brake spindles.
Not covered: 1974 Ford Mustang, 1970 Mercury Comet, Ford Torino or Mercury Montego models outside 1970-1971, and Mercury Cyclone after 1970. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fitment notes call for OE drum brake spindles, so confirm your spindles before work begins. Check wheel clearance with the Q082H template, since the minimum wheel diameter listed is 17.0 inch. Brake work is safety-critical, so have a qualified technician handle the installation.
What’s included
Front rotor, 4-piston T4 calipers, billet aluminum hubs with premium bearings, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts.














