Overview
The Baer Brakes 4302252S is an Extreme Plus 14-inch rear brake system kit for GM small pattern 10/12 bolt rear axles that have C-clip axle housing ends, on a 5×4.75 and 5×5 bolt circle. It uses a silver one-piece monoblock six-piston caliper, a two-piece slotted, drilled and zinc-plated rotor, and the D1247 pad type.
The backing plate acts as the caliper mount and houses a one-piece park brake shoe assembly, so the parking brake is built into the same unit. The Extreme Plus 14-inch suits most wheels 18 inches or larger, but wheel styles vary too widely to guarantee fit, so compare clearance with the N110P template first.
Key features
- One-piece monoblock six-piston caliper, model 6S, with a floating design
- Caliper forging is US-sourced 2618 aluminum, CNC machined
- Stainless pistons and abutments, plus stainless noise suppression clips
- Staggered piston layout to reduce uneven pad wear
- Dual seals for dust, weather and pressure
- Rotor: two-piece, slotted and drilled, zinc plated, with billet aluminum hat and NAS high grade stainless hardware
- Powder coated silver finish
- Stainless braided hoses and hardware included
How the parking brake works
On a kit with a backing-plate park brake, the shoe assembly presses against the inside of the rotor hat when the lever or cable is applied. The shoes wear more slowly than the pads in normal driving, but they still need periodic adjustment and inspection so the lever holds the vehicle reliably on a grade.
When the rear brakes are rebuilt, the park brake components are usually checked at the same time. Worn shoes, a seized adjuster or a stretched cable can each reduce holding power, and any of these should be addressed before the vehicle is used on steep terrain.
- Adjust the park brake after the first few uses
- Inspect shoes and cables during pad changes
- Replace a stretched cable rather than over-tightening it
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302252S |
| UPC | 844165043096 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Wheel bolt pattern | 5×4.75 / 5×5.00 |
| Lug count | 5 lug |
| Caliper | 6-piston monoblock, model 6S, floating |
| Caliper color | Silver |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Brake pad FMSI number | D1247 |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Park brake | Included |
| Park brake cables | Not included |
| Front rotor included | No |
| Lug nuts included | No |
| Emission code | 6 |
| Template | N110P |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
Its flange is GM small pattern 10/12 bolt with C-clip axle housing ends, which sets the rear axles this kit is built for. Confirm fit for your vehicle’s year, model and trim before ordering.
Axles with bearing-on-axle housing ends use a different flange and fall outside this kit’s flange style. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors arrive pre-assembled with stainless hardware, and stainless hoses with hardware are supplied. Lug nuts and park brake cables must be sourced separately. Verify the rear housing ends are the C-clip style before purchase, and use the N110P template for wheel clearance. Installation should go to an experienced brake technician, because a hydraulic brake fault is a serious safety risk.
What’s included
The six-piston monoblock caliper, the backing plate with its park brake shoe assembly, the pre-assembled two-piece rotor, and stainless hoses with hardware.
Not included: the front rotor, park brake cables and lug nuts.















