Overview
The Baer Brakes 4261379R is a red S4 front brake system kit for 1970 to 1974 Ford and Mercury cars that came with drum brakes up front. It replaces the front drum setup with an 11-inch two-piece slotted and drilled rotor and a four-piston S4 caliper, and it covers the Ford Falcon, Fairlane, Maverick, Mustang and Torino and the Mercury Comet, Cougar, Cyclone and Montego.
The billet aluminum hubs arrive with premium bearings packed in Redline synthetic grease and billet dust caps. The rotors come pre-assembled with stainless hardware, and the mounting brackets, stainless braided hoses and hardware are included, so the kit covers the whole front brake package for the vehicles in the fitment section.
Key features
- Four-piston S4 caliper with a red powder coated finish
- Two-piece 11-inch rotor, slotted, drilled and zinc plated, with an iron rotor and aluminum hat
- Billet aluminum hubs with premium bearings and billet dust caps
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure, plus T compliant dust and weather seals
- DR1 or HB100 pad types
- Stainless steel braided hoses, DOT approved
- CNC machined from US sourced forged or billet aluminum
Hub and spindle checks
Before mounting pre-assembled hubs, look over the spindle for scoring, rust and fit. A clean, undamaged spindle helps the hub seat square and keeps the rotor running true. Any roughness on the spindle surface should be addressed before the kit goes on.
Bearing preload matters for hub life. Grease the bearings as the service manual directs, tighten the spindle nut to the stated procedure, and check for play by hand. Excess play can wear the rotor and pads unevenly and should be corrected before driving.
Brake dust and road salt build up around the hub and caliper. Clean the area regularly with a non-acidic cleaner and keep the dust cap in place, since it keeps water and grit away from the bearings.
- Inspect the spindle surface before assembly
- Check hub play after the first drive
- Keep dust caps seated and in good condition
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261379R |
| UPC | 844165035039 |
| Caliper | S4, four-piston, fixed, red |
| Rotor diameter | 11.0 inch |
| Rotor construction | 2-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Lug count and bolt pattern | 5 lug, 5×4.50 inch |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Minimum wheel diameter | 15.0 inch |
| Pad type | DR1 (FMSI), HB100 also listed |
| Hose material | Steel braided, DOT approved |
| Template | S162A |
| Axle | Front |
| Grade | Performance |
| Country of origin | US |
| Sold as | Kit |
Vehicle fitment
Baer’s listed fitment covers the 1970 Ford Fairlane, 1970 Ford Falcon, 1970 to 1974 Ford Maverick, 1970 to 1973 Ford Mustang, 1970 to 1971 Ford Torino, 1971 to 1974 Mercury Comet, 1970 to 1973 Mercury Cougar, 1970 Mercury Cyclone and 1970 to 1971 Mercury Montego. The fitment notes specify cars with OE drum brake spindles.
This kit is for cars with OE drum brake spindles. Use template S162A to check wheel clearance, since fit can vary by wheel style. Verify fit against your vehicle’s year, model and trim before buying.
Installation notes
The hubs and rotors arrive pre-assembled, so the work centers on the spindle fit. Check wheel clearance with template S162A before mounting, and use wheels at least 15.0 inch in diameter. Lug nuts are not included, so have 5-lug nuts with 1/2-20 threads ready. Because this system controls stopping, have a shop with brake experience install and bleed it.
What’s included
The kit includes the front S4 calipers, 11-inch two-piece rotors with aluminum hats, billet aluminum hubs with bearings and dust caps, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts.














