Overview
The Baer Brakes Track4 front disc kit, part number 4261291B, pairs a black 4-piston T4 caliper with a 13-inch rotor and is made for Ford and Mercury cars with the factory drum brake spindle. It fits the 1970 Ford Fairlane and Falcon, 1970-1974 Ford Maverick, 1970-1973 Ford Mustang, 1970-1971 Ford Torino, 1971-1974 Mercury Comet, 1970-1973 Mercury Cougar, 1970 Mercury Cyclone and 1970-1971 Mercury Montego.
The billet aluminum hubs come with premium bearings packed with Redline synthetic grease and are assembled with billet dust caps. The 13-inch Track4 suits most wheels 17 inch or larger, though not every wheel style will clear it. Use the Q082H template to check fit before mounting, and the pad type is D0749.
Key features
- Black-finished 4-piston T4 caliper, manufactured in Phoenix, AZ
- One-piece slotted, drilled, zinc-plated iron rotor, 13.0 inch
- Billet aluminum hubs with premium bearings and billet dust caps
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- DOT approved stainless braided hoses with mounting brackets and hardware
Brake fluid and hose care
Brake fluid absorbs moisture from the air over time, and that moisture lowers its boiling point. Fluid that has been in an older car for years may be contaminated even when the pedal feels firm. Flushing the fluid when a brake system is opened keeps the new calipers and hoses working as intended and helps avoid vapor lock on hard stops.
Braided hoses hold their shape under pressure better than rubber, but the fittings at each end still need care. Check that each hose clears the suspension and steering components through full travel, and watch for kinks after the wheel is turned. Inspect the crimped ends closely, since leaks there are easy to miss at a glance.
- Use the fluid type named on the master cylinder cap
- Bleed each caliper in the proper order
- Look for seepage at banjo bolts and fittings
- Check hose routing after the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261291B |
| UPC | 844165043539 |
| Caliper | T4, 4-piston, fixed, black |
| Rotor diameter | 13.0 inch |
| Rotor type and construction | 1-piece, vented, slotted and drilled |
| Rotor material | Iron, zinc plated |
| Rotor thickness | 1.1 |
| Brake pad FMSI number | D0749 |
| Template | Q082H |
| Hub | Billet aluminum |
| Brake hose | Steel braided, DOT approved |
| Lug count | 5 |
| Wheel bolt pattern | 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 Inch |
| Minimum wheel diameter | 17.0 inch |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
Based on the listed applications, this kit is intended for the following vehicles with the drum brake spindle (w/Drum):
- Ford: 1970 Fairlane, 1970 Falcon, 1970–1974 Maverick, 1970–1973 Mustang, 1970–1971 Torino
- Mercury: 1971–1974 Comet, 1970–1973 Cougar, 1970 Cyclone, 1970–1971 Montego
Other generations and models, and vehicles with disc brake spindles, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Hub bearings are already packed at the factory, so no regreasing is needed before fitting. Check the Q082H template against the wheels you plan to run, since the minimum wheel diameter is 17.0 inch.
What’s included
Front 1-piece rotor, black 4-piston T4 caliper, billet aluminum hubs with bearings, billet dust caps, all mounting brackets, stainless braided hoses and hardware.
Not included: Lug nuts are not included.














