Overview
The Baer Brakes 4262320FR is an SS4 Plus Dual Deep Stage rear brake set for Ford 9 inch axles with small bearing housing ends. The dual set uses four S4 4-piston calipers in fire red, mounted to 11.0 inch 2-piece slotted and drilled rotors, and is sold as a set. It is a drag race system for heavy, fast cars that may also be driven on the street.
Baer built the SS4 Plus Dual to bring the benefits of its larger brake systems into a smaller package, sized for wheels 15 inch and larger. The rotors are zinc plated, and the pads are a high friction type made for drag racing. The axle flange requirement is 5.75 inch.
Key features
- Four 4-piston S4 calipers with 1.75 inch pistons in fire red powder coat
- Hard anodized aluminum pistons with stainless abutments and noise suppression clips
- 11.0 inch 2-piece slotted, drilled, zinc-plated rotors
- Billet aluminum hats drilled for 5/8 inch wheel studs
- High friction pads for drag race use
- Pre-assembled rotors with NAS high grade stainless hardware and mounting hardware included
- Designed for wheels 15 inch and larger, with a 15.0 inch minimum wheel diameter
Before you buy
Rear brake upgrades on a Ford 9 inch are usually planned around the axle before anything else. Start by measuring the housing end type, the bolt pattern and the flange requirement, then choose a caliper count that suits the weight and power of the car. A four-caliper arrangement adds clamping force but also adds weight and heat, so the axle bearings, rear hubs and brake lines all need to be in sound condition before the install begins.
Drag use wears pads and rotors faster than street driving. Inspect the pad surface and rotor faces after each session, looking for glazing, cracks or uneven wear. Mounting bolts on the calipers and brackets deserve a check after the first few runs, since repeated heat cycles can loosen hardware on a new install. Keep a simple log of service dates so wear patterns become easy to spot.
- Measure the axle flange before ordering
- Plan for new hoses and lug nuts
- Inspect pad material and rotor surfaces after each run
- Recheck caliper bracket fasteners early in the break-in
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262320FR |
| UPC | 844165038405 |
| Caliper | S4, fixed, 4-piston |
| Calipers included | 4 |
| Caliper color | Fire Red |
| Piston size | 1.75 inch |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Minimum wheel diameter | 15.0 inch |
| Bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Axle flange | Ford 9 inch Small Bearing |
| Required axle flange | 5.75 inch |
| Friction material | Semi-metallic |
| Pad FMSI number | DR1 |
| Template | S125A |
| Park brake | Not included |
| Hoses | Not included |
| Country of origin | US |
Vehicle fitment
This dual set fits Ford 9 inch rear axles with small bearing housing ends. Match your rear axle to that flange and confirm the 5.75 inch requirement before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Four calipers on a dual rear setup call for an experienced brake technician to handle the install and final setup. Mounting hardware and pre-assembled rotors come with the kit, but hoses and lug nuts do not, so obtain those before work starts.
What’s included
Four S4 calipers with 1.75 inch pistons in fire red, 11.0 inch 2-piece slotted and drilled rotors with billet aluminum hats, high friction pads, dust and weather seals, and mounting hardware.
Not included: brake hoses and lug nuts.















