Overview
The Baer Brakes SS4 Plus 13.0 inch rear brake system in red, part number 4262262R, is a rear disc brake kit for the Ford 9 inch early Big Bearing rear axle with a 5×5.00 wheel bolt pattern. The four-piston S4 caliper works with a vented, two-piece slotted and drilled rotor, and a one-piece park brake shoe assembly sits inside the backing plate.
The red caliper is the visible difference in this version. The system is for wheels 17 inch or larger, and the kit is sold as a rear-axle set. Verify your axle housing and wheel bolt pattern before ordering.
Key features
- Four-piston S4 caliper built in Phoenix, Az, from CNC machined US sourced forged or billet aluminum
- Powder coated caliper body in red
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals resisting dust, weather and pressure
- Two-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Backing plate that serves as the caliper mount and houses the park brake shoe assembly
Brake balance and wheel clearance
Changing the rear brakes shifts how the axle shares braking force with the front, so an upgrade works best when the front setup is in good condition. Wheel clearance is the other common check. A larger rotor and a four-piston caliper take up more space behind the wheel, so offset and backspacing should be considered before mounting. Trail use adds dirt and water exposure, which makes seal and boot condition more important.
Upgraded rear systems are often installed alongside new hoses, fresh brake fluid and updated pads, since those parts age at the same pace as the old caliper. Keep the park brake function in mind as well: cable routing and adjustment should be confirmed before the vehicle is driven on steep terrain. Signs that the rear system needs attention include a soft pedal, grinding, uneven rotor wear and a caliper that drags after release.
- Front brake condition
- Wheel offset and backspacing
- Hose and fluid age
- Park brake cable routing
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262262R |
| UPC | 844165028468 |
| Caliper | S4, four-piston, fixed |
| Caliper color | Red |
| Rotor type | Two-piece, slotted, drilled, zinc plated |
| Rotor design | Vented |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 0.81 |
| Rotor material | Iron with aluminum hat |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 |
| Minimum wheel diameter | 17.0 inch |
| Axle flange | Ford 9 inch early Big Bearing |
| Pad type | DR1-C |
| Template | S135H |
| Park brake | Included; park brake cables not included |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
The kit is built for the Ford 9 inch early Big Bearing rear axle with a 5×5.00 wheel bolt pattern. Check wheel fit against the S135H template before mounting, since wheel styles vary in fit.
Installation notes
The rotor comes pre-assembled with NAS high grade stainless hardware. Park brake cables and lug nuts are excluded, so plan to source them separately. A qualified brake technician should set up the caliper and bleed the hydraulic system.
What’s included
Two-piece rotor pre-assembled with stainless hardware, S4 caliper, backing plate with park brake shoe assembly, and braided hoses with hardware.
Not included: park brake cables, lug nuts and front rotor.















