Overview
The Baer Brakes 4262261R is a red SS4 rear brake system kit for Ford 9 inch early big bearing housing ends with a 5 on 5.00 inch wheel bolt pattern. It pairs a 4-piston S4 caliper with a 12 inch, 1-piece slotted, drilled and zinc-plated rotor, and it is sold as a kit.
Baer’s backing plate serves as the caliper mount and also houses a modern 1-piece park brake shoe assembly, so the kit covers rear service braking and parking brake hardware in one package. The caliper is powder coated in red. No specific vehicle year, make or model is listed, so the kit is matched by axle flange and wheel bolt pattern.
Key features
- 2-piece 4-piston S4 caliper, manufactured in Phoenix, Az
- CNC machined from US-sourced forged or billet aluminum
- Powder coated red caliper finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual seals for dust, weather and pressure
- 1-piece slotted, drilled, zinc-plated 12 inch rotor
- Stainless braided, DOT approved hoses included
- 1-piece park brake shoe assembly housed in the backing plate
Before you buy
A rear disc kit replaces the caliper, rotor and pads at the axle, so start with the housing ends on your rear axle. Confirm the flange type and wheel bolt pattern before comparing other details. Wheel clearance also matters, since a larger caliper and rotor can reduce the room behind the spokes on some wheel designs.
The park brake side deserves the same attention. A shoe assembly inside the backing plate only works when the cables and adjuster hardware are routed and set correctly, so review that part of the install before the vehicle returns to the road. Pad compound should suit how the vehicle is driven, because street use, towing and trail work load the brakes in different ways.
- Flange type and bolt pattern
- Wheel clearance around the caliper
- Park brake cables and adjustment
- Pad compound for your driving
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262261R |
| UPC | 844165028406 |
| Caliper | S4, 4-piston, fixed |
| Caliper color | Red |
| Rotor type | 1-piece, vented |
| Rotor material | Iron |
| Rotor outside diameter | 12.0 inch |
| Rotor thickness | 1.02 |
| Rotor surface | Slotted, drilled and zinc plated |
| Lug count | 5 lug |
| Bolt pattern | 5×5.00 |
| Minimum wheel diameter | 16.0 inch |
| Brake pad FMSI number | DR1-C |
| Pad type | DR1 or HB100 |
| Template | S113E |
| Hose material | Steel braided, DOT approved |
| Axle flange | Ford 9 Inch Early Big Bearing (rear) |
| Park brake | Included |
| Emission code | 6 |
| Sold as | Kit |
| Country of origin | US |
Vehicle fitment
It fits the Ford 9 inch early big bearing rear axle housing ends with a 5×5.00 wheel bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
Wheel style clearance varies, so compare template S113E to the wheel you plan to run. Verify that the year, model and trim match your vehicle before you place the order.
Installation notes
Park brake cables are not included, so a separate cable set is needed to use the park brake shoe assembly. Stainless braided hoses are included. Lug nuts are not included, so supply 5 lug nuts that suit your wheels. Rear caliper and rotor work affects stopping power, so have a qualified technician install the kit and check the brakes before driving.
What’s included
The kit includes the red S4 4-piston rear caliper, the backing plate with its 1-piece park brake shoe assembly, the 12 inch 1-piece slotted and drilled zinc-plated rotor, and stainless braided hoses.
Not included: park brake cables, lug nuts and the front rotor.















