Overview
The Baer Brakes 4262266C is a dual deep stage rear brake kit for Ford 9 Inch rear axles with Torino (late big) bearing housing ends and a 5×4.50/5×4.75 bolt pattern. It uses four S4 calipers with 1.75 inch pistons clamping 11.0 inch two-piece rotors, and it is a drag race system for heavy, fast cars that may also see street use.
The SS4 Plus Deep Stage design is a compact option for wheels of 15 inches and larger, keeping the braking character of bigger systems. The kit includes dual (two sets) of calipers, matching the four calipers in the feature list, and it requires a 5.75 Inch axle flange.
Key features
- Four S4 calipers, each a 4-piston design, in a clear powder coated finish
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Two-piece slotted, drilled and zinc plated rotors with billet aluminum hats drilled for 5/8 inch wheel studs
- Rotors pre-assembled with NAS high grade stainless hardware
- High friction pads designed for drag race applications
- T compliant dust and weather seals
- Designed for wheels 15 inches and larger
- Manufactured in Phoenix, Az
Choosing a rear setup
Axle flange and wheel clearance decide whether a dual caliper kit can be mounted cleanly. Measure the space between the caliper body and the inside of the wheel before final assembly, paying attention to spoke shape and lip depth. A clear finish is cosmetic only, so it does not change braking performance, but it will show heat staining and grime sooner than a painted surface.
Plan for matching parts when the kit is installed. Brake hoses, lug nuts and the front rotor are separate purchases, so confirm they fit the same system before the rear end is assembled. Rotors and pads should be replaced as a set so that wear stays even across the dual calipers.
- Confirm axle flange before ordering
- Check wheel clearance around caliper bodies
- Replace pads and rotors as a matched set
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262266C |
| UPC | 844165037453 |
| Caliper | S4, fixed type, clear |
| Pistons | 4-piston calipers, 1.75 inch pistons, four calipers |
| Rotor outside diameter | 11.0 Inch |
| Rotor construction | 2-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Surface finish | Zinc plated |
| Pad FMSI number | DR1 |
| Friction material | Semi-metallic |
| Lug count | 5 Lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 Inch |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Axle flange requirement | 5.75 Inch |
| Park brake | No |
| Finish | Powder coated |
| Grade | Performance |
| Template | S125A |
| Country of origin | US |
Vehicle fitment
No vehicle list is available for this kit. It is written for the Ford 9 Inch rear axle with Torino (late big) bearing housing ends, a 5×4.50/5×4.75 bolt pattern and a 5.75 Inch axle flange, so the match is by axle and wheel specification rather than by model year.
Fit is set by axle and wheel specification rather than by model year. The kit is for the Ford 9 Inch rear axle with Torino (late big) bearing housing ends, a 5×4.50/5×4.75 bolt pattern and a 5.75 Inch axle flange. Check fit against your vehicle’s year, model and trim before buying.
Installation notes
Hoses are not included, so brake lines must be sourced separately before the system can be plumbed. Mounting hardware is included, and the rotors arrive pre-assembled with stainless hardware, so keep those assemblies together during handling. Have a qualified brake shop install the kit, since brake work directly affects stopping performance.
What’s included
The kit includes four S4 calipers, two-piece rotors pre-assembled with stainless hardware, mounting hardware and high friction pads designed for drag race applications.
Not included: hoses, front rotor, lug nuts and park brake components.















