Overview
The Baer Brakes 4262177R is a 13.0 inch rear brake kit for Ford 8 inch and 9 inch axles with small bearing housing ends and a 5×5.00 inch wheel bolt pattern. Each side uses a red 6-piston fixed caliper clamping a two-piece slotted, drilled and zinc plated rotor with a billet aluminum hat.
The backing plate is the caliper mount and holds a one-piece park brake shoe, so the parking brake is part of the rear plate. The kit uses the D0731 pad type and comes with stainless braided hoses. Match the axle flange and wheel bolt pattern to your vehicle before buying.
Key features
- Red-finished 6P six-piston fixed calipers with stainless steel pistons and abutments
- Staggered pistons designed to reduce uneven pad wear
- Dual seals guard against dust, weather and pressure, and the design is DOT-compliant.
- Two-piece slotted, drilled and zinc plated rotors with billet aluminum hats
- CNC machined components from US sourced forged or billet aluminum, powder coated
- Steel braided hoses marked DOT approved, plus NAS high grade stainless hardware
Caliper color and service
Red calipers are a finish choice, and the coating does not change how the brake works. Powder coat holds up well to road salt and heat when kept clean, but brake dust and grit can dull it over time. Wipe the caliper body with mild soap and water rather than a solvent that could strip the finish.
Stainless pistons and abutments resist corrosion, which helps the pistons slide freely when the brakes are released. Sticking pistons cause dragging and uneven pad wear, so watch for a wheel that runs hot after a drive. When the rotors are replaced, the pads and hardware should be checked at the same time to keep the system balanced.
- Check hoses for chafing where they pass the axle
- Keep pad slide pins clean and lightly greased
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262177R |
| UPC | 844165036807 |
| Caliper type | 6P six-piston fixed caliper |
| Caliper color | Red |
| Caliper piston quantity | 6 |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece slotted, drilled, zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Minimum wheel diameter | 17.0 inch |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×5.00 inch |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Pad type (FMSI) | D0731 |
| Hose material | Steel braided, DOT approved |
| Park brake | Includes park brake shoe assembly; park brake cables not included |
| Template | Q082H |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The kit suits Ford 8 inch and 9 inch rear axles with small bearing housing ends and a 5×5.00 inch bolt pattern. Fit with every wheel style is not guaranteed, so use the Q082H template to check wheel clearance.
Axles with a different housing end or wheel bolt pattern are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Test fit the rotor and wheel with the Q082H template before mounting. Park brake cables are not in the box, so plan to source them separately. Keep the pre-assembled stainless hardware on the rotors during fitting, then bleed the brake lines fully and test pedal feel at low speed before driving.
What’s included
The kit covers the red calipers, 13.0 inch two-piece rotors, backing plates with park brake shoe assemblies, stainless braided hoses and the pre-assembled NAS hardware.
Not included: lug nuts, park brake cables, and the front rotor.















