Overview
The Baer Brakes 4262319C is an SS4 Plus Dual Deep Stage rear brake kit for GM small pattern 10/12 bolt bearing on axle housing ends, with a non-flush mount and 3.150 inch bearing. It uses four clear S4 4-piston calipers on 11.0 inch 2-piece slotted, drilled rotors and carries 1.75 inch pistons.
Baer frames the Deep Stage line as a drag race system for heavy, fast cars that might see street use, scaled down to fit 15 inch and larger wheels. The rotors are zinc plated on billet aluminum hats, and the kit carries high friction pads designed for drag racing.
Key features
- Four clear S4 calipers with 1.75 inch pistons
- Hard anodized aluminum pistons, stainless steel abutments, and noise suppression clips
- 2-piece slotted, drilled, zinc-plated rotors on billet aluminum hats
- Hats drilled for 5/8 inch wheel studs
- High friction drag race pads
- Rotors arrive with NAS high grade stainless hardware pre-installed
- Non-flush mount with 3.150 inch bearing.
Drag brake setup notes
Drag brake packages are set up around the rear end first, and caliper count, rotor size and pad compound all work together. A clear finish does not change braking performance, so choose based on fitment and budget. Plan for a complete parts list, including hoses, fittings and any park brake hardware you need to source separately, so the work can move forward without waiting on deliveries.
Heavy use stresses rotors and hubs, so check for heat cracking, uneven wear and runout after each event. Replace pads when the friction material thins or glazes, and keep matched pads on both sides. Flush the hydraulic system with fresh fluid on a regular schedule, because hot braking can break down old fluid faster than street driving does.
- Source hoses and fittings before the install starts
- Check rotor faces for heat checking
- Replace pads in matched pairs
- Bleed the system after any line work
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262319C |
| UPC | 844165029748 |
| Caliper | S4, fixed, 4-piston |
| Calipers included | 4 |
| Caliper color | Clear |
| Piston size | 1.75 inch |
| Mount | Non-flush, 3.150 inch bearing |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 |
| Rotor material | Iron with aluminum hat |
| Minimum wheel diameter | 15.0 inch |
| Bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Axle flange | GM Small Pattern 10/12 Bolt Bearing on Axle (Buick/Olds/Pontiac) |
| Required axle flange | 5.75 inch |
| Friction material | Semi-metallic |
| Pad FMSI number | DR1 |
| Template | S125A |
| Park brake | Not included |
| Hoses | Not included |
| Country of origin | US |
Vehicle fitment
This clear 11.0 inch kit fits GM small pattern 10/12 bolt bearing on axle housing ends, the flange type used on Buick, Olds and Pontiac applications. Verify the housing before ordering. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the GM small pattern housing end matches the non-flush mount and 3.150 inch bearing before starting. Hoses, lug nuts and front rotors are not in the box, so arrange those in advance. Drag race brake systems need careful setup, so have a qualified brake shop handle the work and verify it before driving.
What’s included
Four clear S4 calipers with 1.75 inch pistons, 11.0 inch 2-piece slotted and drilled rotors with billet aluminum hats, high friction pads, dust and weather seals, and mounting hardware.
Not included: brake hoses, lug nuts and a front rotor.















