Overview
The Baer Brakes 4302344R is a red 13.0 inch rear brake system for GM small pattern 10/12 bolt rear axles that use a bearing on axle (BOA) with flush mount bearing housing ends. It pairs a 6-piston fixed caliper with a 2-piece slotted, drilled and zinc plated rotor, and it is drilled for a 5×4.75 and 5×5.00 wheel bolt pattern.
Baer’s backing plate serves as the caliper mount and also houses a modern one-piece park brake shoe assembly. The rotors come pre-assembled with NAS high grade stainless hardware, and stainless braided hoses and hardware are included. The 13 inch Pro Plus is intended for wheels 17 inches or larger, but fit with every wheel style cannot be guaranteed, so check clearance with the Q110H template before mounting.
Key features
- 6-piston (6P) caliper with stainless steel pistons and abutments
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc plated rotor on a billet aluminum hat
- Stainless steel noise suppression clips
- CNC machined from US-sourced forged or billet aluminum with a powder coated finish
- Stainless steel braided hoses with DOT approved rating
Pad and rotor wear
Rear brake rotors and pads wear at different rates depending on how a vehicle is driven. On the trail, repeated descents and wet crawling put heat and grit into the friction surfaces, while highway driving tends to load pads more evenly. Checking pad thickness at each service and looking for scoring or heat blue on the rotor helps catch problems early.
A larger rotor changes how heat spreads through the hub, so keep the parking brake shoes adjusted and inspect the backing plate for loose hardware after the first few runs. Whenever pads or rotors are replaced, replace them as a set on each axle so braking stays even side to side. Brake fluid should be checked too, since it absorbs moisture over time and can lower pedal firmness under heavy use.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302344R |
| UPC | 844165044055 |
| Caliper | 6-piston (6P), fixed, red |
| Rotor outside diameter | 13.0 inch |
| Rotor thickness | 1.1 |
| Rotor type | 2-piece, slotted, drilled, zinc plated, iron with aluminum hat |
| Minimum wheel diameter | 17.0 inch |
| Pad type | D0731 (FMSI) |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Axle flange | GM small pattern 10/12 bolt with flush mount bearing |
| Bearing on axle | 3.150 inch hybrid |
| Park brake | Included; park brake cables not included |
| Brake hose | Steel braided, DOT approved |
| Template | Q110H |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
Installation notes
Park brake cables are not included, so confirm the parking brake hookup before the rear assembly goes together. Use Baer’s Q110H template to compare caliper and rotor clearance with the wheels you plan to run. Front rotors and lug nuts also need to be sourced separately. Brake work is safest left to a qualified technician.
What’s included
The kit includes the 6-piston caliper, 2-piece rotor assembly, backing plate with the one-piece park brake shoe assembly, pre-assembled rotors with stainless hardware, and stainless braided hoses with hardware.
Not included: Park brake cables, front rotors and lug nuts.















