Overview
The Baer Brakes 4262654B is a black SS4 rear brake kit for Ford 8 inch and 9 inch rear axles with small bearing housing ends and a 5×5.00 bolt pattern. A 4-piston S4 caliper clamps a 12 inch one-piece slotted and drilled rotor with a zinc plated surface.
Among the variants in this family, the black caliper finish is the difference from the red 4262654R. The backing plate serves as the caliper mount and houses a one-piece park brake shoe assembly, so a single rear assembly covers service and park braking. Stainless braided hoses come in the kit, and the S4 is designed for most 16 inch or larger wheels.
Key features
- Black powder coated S4 caliper with hard anodized aluminum pistons
- Zinc plated one-piece rotor, 12 inch, slotted and drilled
- Park brake shoes integrated in the backing plate
- Dust, weather and pressure seals
- Noise suppression clips and stainless steel abutments
- Braided steel hoses marked DOT approved
- Forged or billet aluminum body, CNC machined from US sourced stock, made in Phoenix, Az
Finish, heat and upkeep
Black powder coat on a brake caliper handles heat and road grime, but it still needs gentle cleaning. Use a mild, pH-neutral wheel cleaner and a soft brush, and avoid strong solvents near the seals. Brake dust builds up fastest on the inner face of the wheel, so a periodic rinse keeps the caliper visible for inspection.
A park brake built into the backing plate works alongside the service brakes, so any adjustment or cable replacement should be checked for smooth operation. Test the park brake on a safe, level surface after the first few drives, and recheck hardware torque after the first trail runs.
- Clean the caliper and rotor surface with a non-abrasive product
- Inspect braided hoses for chafing at each service
- Recheck lug nut torque after initial use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262654B |
| UPC | 844165038702 |
| Sold as | Kit |
| Caliper | S4, 4 pistons, fixed |
| Caliper color | Black |
| Rotor diameter | 12.0 inch |
| Rotor type | 1-piece, slotted and drilled |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Pad FMSI number | DR1-C |
| Pad types | DR1 or HB100 |
| Hose material | Steel braided |
| Axle flange | Ford 8 Inch/9 Inch Small Bearing |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Minimum wheel diameter | 16.0 inch |
| Park brake | Included |
| Park brake cables | Not included |
| Front rotor included | No |
| Lug nuts included | No |
| Template | S113E |
| Emission code | 6 |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is made for Ford 8 inch and 9 inch rear axles with small bearing housing ends, on a 5 lug, 5.00 inch bolt circle.
Wheel fit cannot be promised across all styles and makes, so check the S113E template against your wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so plan to source them for the park brake shoe assembly. Measure wheel clearance with the S113E template before mounting the caliper and rotor.
What’s included
The kit contains the black S4 rear caliper, the 12 inch one-piece rotor, the backing plate with park brake shoe assembly, and stainless braided hoses.
Not included: park brake cables, lug nuts and the front rotor.















