Overview
The Baer Brakes 4262238R is a red-caliper SS4 rear brake system for Ford 8-inch and 9-inch small bearing rear ends running 5×4.50 and 5×4.75 wheel bolt patterns. The kit centers on a fixed 4-piston SS4 caliper that clamps a 12.0-inch, one-piece vented rotor with slots and drilling.
A backing plate houses the park brake shoe assembly and also serves as the caliper mount, so parking duties are handled inside the rear system. Stainless braided hoses come with the kit. The 12-inch SS4 is designed to fit most wheels 16 inches or larger. Because fit is not guaranteed for every wheel style, a template check is recommended before mounting.
Key features
- Red SS4 caliper with powder coated surface
- Machined in the US from forged or billet aluminum stock
- Hard anodized aluminum pistons paired with stainless steel abutments
- Noise suppression clips included
- Dual seals guard against dust, weather and pressure
- Slotted, drilled, zinc-plated one-piece rotor
- Manufactured in Phoenix, Az
Red caliper upkeep
Painted calipers keep their finish best when the wheels are cleaned regularly and brake dust is rinsed rather than scrubbed. Powder coated surfaces resist chipping, but a stone strike can still expose metal, so touch-up the spot promptly to slow corrosion. Keep the caliper bracket bolts at the specified torque when the wheel is reinstalled.
Pads and rotors should be checked together. A rotor with heavy grooving can glaze a new pad, and a pad that has been used on a warped rotor will wear unevenly. Replacing the rotor and pads as a set helps the new friction surfaces seat evenly and keeps braking smooth.
- Rinse brake dust instead of scrubbing
- Touch up chips to slow corrosion
- Replace pads and rotors as a set
- Retorque caliper bracket bolts after service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262238R |
| UPC | 844165027928 |
| Caliper | SS4, 4-piston |
| Caliper type | Fixed |
| Caliper color | Red |
| Pad FMSI number | DR1-C |
| Rotor outside diameter (rear) | 12.0 inch |
| Rotor construction | One-piece, vented, slotted, drilled and zinc plated |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Lug count | 5 lug |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Minimum wheel diameter | 16.0 inch |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Park brake | Shoe assembly included; park brake cables not included |
| Brake hose | Steel braided, DOT approved |
| Template | S113E |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
The kit’s application is set by the axle: Ford 8-inch or 9-inch small bearing rear flanges with 5×4.50 and 5×4.75 wheel patterns. Compare those specifications against your own axle before going further.
Rear ends with a different flange type or bolt pattern fall outside this kit’s listed application. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the caliper mount and park brake shoe assembly share one backing plate, the rear install is a complete system rather than a caliper swap. Start with a wheel clearance check against the Baer template, since the minimum wheel diameter is 16.0 inch. Park brake cables are not included and need separate sourcing. Have a qualified installer fit the brakes and test pedal feel before highway use.
What’s included
Included: the red SS4 4-piston caliper, the one-piece 12.0-inch rotor, the park brake shoe assembly in the backing plate, and stainless braided hoses.
Not included: Park brake cables, lug nuts and front rotor.















