Overview
The Baer Brakes 6929623 is a 1-piece replacement brake rotor for the right side of the vehicle, with a 12 inch outside diameter and a 1.02 inch nominal thickness. It has a slotted surface finish and is intended for select Baer Brake systems. The rotor is sold individually, so each position needs its own part.
The right-side rotor is a directional part and should not be installed on the left. It is a performance-grade casting with a modified drum and drum lip built into the hat. Compatibility depends on the brake package on your vehicle, so confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Curved vane design that Baer Brakes says optimizes cooling
- Full cast, one-piece construction with a vented rotor design
- Directional braking surface made for the right side only
- Dynamic balancing for vibration-free running, per the manufacturer
- Slotted surface finish on cast-iron material
- Drum in hat with a modified drum and drum lip
Matching a replacement rotor
A replacement rotor has to match the hub it is mounted to, not just the wheel size. Check the center hole, the bolt pattern and the overall height against the hub before fitting, and confirm that the rotor sits flat against the hub face with no rust or debris trapped between them. A rotor that seats poorly can cause pulsation even when it is new.
Rotors are sold one at a time, so buying a matched pair is a common approach when both sides wear unevenly. Right-side parts are handled differently from left-side parts because the braking surface is directional. Keep the sides separated during the job so they are not swapped.
Cast-iron rotors with slotted faces tend to clear pad debris, but they still need periodic inspection. Look for heat cracks, deep grooves, a raised lip at the outer edge and uneven thickness. Pads worn down to the backing plate will damage the surface quickly, so change them when the rotor is replaced.
- Replace pads when rotors are changed
- Clean the hub face with a wire brush before mounting
- Torque lug nuts to the value for your vehicle
- Bed in new pads with a series of moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929623 |
| UPC | 90127962510 |
| Outside diameter | 12 in |
| Nominal thickness | 1.02 in |
| Overall height | 2.406 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 in |
| Center hole diameter | 2.78 in |
| Register | 2.780 in |
| Axle side | Right |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Material | Cast iron |
| Drum in hat | Yes |
| Notes | Has modified drum and drum lip |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
No vehicle is named for part number 6929623 in the stored fitment data. The manufacturer places it within select Baer Brake systems, so compatibility depends on the brake package installed on your vehicle.
This rotor fits select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Mount only the right-side rotor on the right hub, and check that the 2.78 in center hole and 5 x 4.75 in bolt pattern match the hub before fitting. Clean the hub face and rotor mounting surface before installing. Support the vehicle securely on stands before removing any wheel.
What’s included
One right-side replacement rotor, sold individually.
Not included: the left-side rotor and an ABS tone ring
