Overview
The Baer Brakes 6920144 is an 11.9 inch by 1.28 inch, two-piece replacement brake rotor with slotted, drilled and zinc-plated surfaces, made for the right side of select Baer Brake systems. It is the disc that brake pads squeeze at the wheel, so it is the part to order when a worn Baer rotor needs replacing on the right side.
The rotor is directional, meaning the vane pattern is built for one side of the vehicle. It uses a 12-bolt pattern on a 7 inch mounting bolt hole circle. The curved vane design is intended for cooling, and the castings are dynamically balanced for vibration-free performance.
Key features
- Two-piece construction in cast iron
- Slotted, drilled and zinc-plated surface
- Vented disc with a curved vane design that Baer says aids cooling
- Directional, built for the right side only
- 12 mounting bolt holes on a 7 inch circle
- Dynamically balanced for vibration-free running
Slotted and drilled surfaces
Slots and drilled holes help gas, water and dust move away from the pad face, which can make the pedal feel more consistent in wet or hard use. The same openings are also places where cracks can start, so the holes deserve a look at every brake service.
Zinc plating protects the iron body from rust while the rotor is new. The coating wears away where the pads contact the surface, so the finish changes over time as the rotor is used.
- Check the drilled holes for cracks at each brake service
- Expect light surface rust on zinc-plated faces, which pads clean off
- Choose pads rated for performance use
- Replace a rotor that shows cracks running out from a hole
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920144 |
| UPC | 844165054788 |
| Outside diameter | 11.9 in |
| Nominal thickness | 1.28 in |
| Mounting bolt hole circle diameter | 7 in |
| Mounting bolt hole quantity | 12 |
| Construction | Two piece |
| Material | Cast iron |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Axle | Right |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This is the right-side rotor, so it does not cover left-side positions. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The directional vane pattern means this right-side rotor belongs on the right wheel only. Check that the 12 x 7 inch bolt pattern matches the hub before fitting. A qualified technician should handle the installation.
What’s included
One right-side replacement rotor, sold as Each.
Not included: brake pads, calipers and mounting hardware.
