Overview
The Baer Brakes 4262148B is a black Pro Plus 13.0 inch rear brake kit for Ford 9 inch rear axles with the early big bearing housing flange and a 5×4.50/5×4.75 wheel bolt pattern. A 6-piston 6P fixed caliper clamps a two-piece slotted, drilled and zinc plated rotor, and the complete rear system is offered as one kit.
The Pro Plus line is sold as a Performance grade rear upgrade. The backing plate is the caliper mount and holds a one-piece park brake shoe assembly, so the parking brake is built into the rear hardware. The D0731 pad type applies to this system.
Key features
- Six-piston 6P fixed caliper in a black powder coated finish, CNC machined from US sourced forged or billet aluminum.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered pistons to help minimize uneven pad wear.
- Dual seals for dust, weather and pressure.
- Two-piece slotted, drilled and zinc plated rotor with a billet aluminum hat.
- One-piece park brake shoe assembly housed in the backing plate.
- Stainless braided hoses and hardware included.
Parking brake setup
A parking brake built into the rear backing plate works differently from a separate drum. The shoe assembly is adjusted at the cable end, so its tension should be checked after the cable is routed and connected. A correctly set parking brake holds the vehicle on a slope and returns fully when released.
Cable routing matters as much as cable length. Keep the run clear of the exhaust, moving suspension parts and sharp edges, and secure it with the correct clips. Because the cables are sourced separately, pick a set that matches the backing plate’s mounting points before starting the install.
- Check shoe tension after connecting the cable
- Route cables away from heat and moving parts
- Test the hold on a slope before regular driving
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262148B |
| UPC | 844165021865 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Caliper | 6P, 6-piston fixed |
| Caliper color | Black |
| Rotor outside diameter | 13.0 inch |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Pad type (FMSI) | D0731 |
| Hose material | Steel braided, DOT approved |
| Park brake included | Yes |
| Park brake cables included | No |
| Minimum wheel diameter | 17.0 inch |
| Emission code | 6 |
| Template | Q082H |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 inch Early Big Bearing rear axle housings with a 5 lug, 5×4.50/5×4.75 wheel bolt pattern, and it suits wheels of 17 inch minimum diameter or larger.
Compare template Q082H with your wheel before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors are pre-assembled with stainless hardware and the stainless braided hoses come in the box. The park brake cables are not part of the kit, so budget for them separately. Measure the bolt pattern and check wheel clearance with the template before mounting. A qualified mechanic should handle the brake installation.
What’s included
Rear 13.0 inch two-piece rotors with stainless hardware, 6P fixed calipers, the backing plate with park brake shoe assembly, and stainless braided hoses with hardware.
Not included: front rotors, park brake cables and lug nuts.















