Overview
The Baer Brakes 4302298S is a rear disc brake system kit for GM 10/12 bolt axles that use C-clip axles. It combines a 12 inch S4 4-piston silver caliper with a 1-piece slotted, drilled, zinc-plated rotor, and it comes as a kit with a park brake.
The axle flange is GM 10/12 Bolt C-Clip (Small Car Pattern), with a 5×4.75/5×5.00 bolt circle. The backing plate carries the caliper mount and a 1-piece park brake shoe assembly. Clearance depends on the wheel design, so use the S113E template before choosing a wheel.
Key features
- S4 4-piston caliper in silver, with hard anodized aluminum pistons and stainless steel abutments
- Noise suppression clips included with the caliper
- Dual seals for dust, weather and pressure
- Floating caliper type, per Baer’s details
- 1-piece slotted, drilled, zinc-plated vented rotor
- Powder coated finish; caliper body CNC machined from US sourced forged or billet aluminum
- Braided brake hoses, DOT approved
C-clip axle checks
C-clip axles hold each axle shaft in place with a clip at the axle end rather than a retainer plate, so the bearing and seal condition matter when a rear brake kit goes on. Before fitting new brake components, check for play, roughness and leaking seals while the wheel is off, since a worn bearing or failing seal can affect rotor runout and pad wear.
The silver caliper and backing plate are easiest to service when they are clean and dry. Keep the mounting surfaces free of grease and debris, and make sure the park brake shoe assembly moves freely before the wheel goes back on. Park brake cables are not included, so plan for that part before the work starts.
- Check axle bearing play before mounting the backing plate
- Inspect axle seals for leaks
- Keep the caliper mounting surfaces clean
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302298S |
| UPC | 844165028833 |
| Caliper | S4, 4-piston, floating, silver |
| Rotor outside diameter | 12.0 inch |
| Rotor type | 1-piece, vented, slotted and drilled |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Rotor finish | Zinc plated |
| Axle | Rear |
| Axle flange | GM 10/12 Bolt C-Clip (Small Car Pattern) |
| Wheel bolt pattern | 5×4.75/5×5.00 |
| Lug count | 5 lug |
| Minimum wheel diameter | 16.0 inch |
| Pad FMSI number | DR1-C |
| Park brake | Included; cables not included |
| Brake hose | DOT approved, braided |
| Country of origin | US |
| Sold as | Kit |
Vehicle fitment
The axle flange is GM 10/12 Bolt C-Clip (Small Car Pattern). Confirm fit for your vehicle’s year, model and trim before ordering.
The axle flange identifies an axle pattern, not a specific make, model or year. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use Baer’s S113E template to compare the silver caliper and rotor with your chosen wheel before mounting, since Baer does not guarantee fit across wheel styles. The park brake shoe assembly is housed in the backing plate, while the park brake cables are not included, so confirm cable availability for your setup before starting. Test pedal feel and parking brake hold in a clear area before driving on public roads.
What’s included
This kit includes the S4 caliper, 1-piece rotor, backing plate with park brake shoe assembly and braided brake hoses.
Not included: park brake cables, lug nuts and front rotor.















