Overview
The Baer Brakes 4262669FR is a dual Deep Stage rear brake kit for Ford 8.8 inch rear ends fitted with C-clip eliminators. It belongs to the SS4 Plus line and clamps four S4 calipers onto 11 inch two-piece slotted, drilled and zinc-plated rotors, finished in Fire Red powder coat.
The SS4 Plus Dual Deep Stage is a drag race system built for heavy, fast cars that may also see street use. The 11 inch system is sized for wheels of 15 inch and larger and suits owners who want a dual-caliper rear brake setup.
Key features
- Four S4 calipers with 1.75 inch pistons in a two-piece design, manufactured in Phoenix, Az
- Pistons are hard anodized aluminum, with stainless steel abutments and noise suppression clips
- Powder coated Fire Red finish on the calipers
- Iron rotors with aluminum hats, slotted, drilled and zinc plated, 11 inch outside diameter
- High friction pads designed for drag race applications, in the DR1 or HB100 pad type
- Billet aluminum hats drilled for 5/8 inch wheel studs
- Dust and weather seals on the calipers
- Rotors arrive pre-assembled with NAS high grade stainless hardware
Setting up a dual-caliper rear
A dual-caliper rear brake setup puts more clamping force on each rotor than a single caliper can, which helps when repeated hard stops generate heat. Pad choice has a large effect on how the system feels, so drag race compounds suit the run-day use they were made for and may feel grabby or cold on the street until they warm up.
Before fitting, confirm the rear axle has been converted to eliminators and that the rotor hats and wheel studs line up with the wheels you plan to run. Brake line routing and master cylinder capacity should be reviewed for the added caliper volume, since a dual setup draws more fluid than a stock rear.
- Match pad compound to how the car is driven
- Re-torque rotor hardware after the first runs
- Bleed the system fully after any line work
- Check rear hub and axle end play during conversion
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262669FR |
| UPC | 844165049050 |
| Sold as | Kit |
| Caliper | S4, four-piston, fixed, two-piece, Fire Red |
| Caliper quantity | 4 |
| Piston size | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor type | Two-piece, vented, slotted and drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.02 |
| Pad type | DR1 or HB100 (FMSI DR1) |
| Friction material | Semi-metallic |
| Axle flange | Ford 8.8 inch, C-clip eliminator |
| Axle flange requirement | 5.75 inch |
| Axle standoff | 2.5 inch |
| Wheel bolt pattern | 5 lug, 5×4.50/5×4.75 |
| Minimum wheel diameter | 15.0 inch |
| Park brake | No |
| Brake hoses included | No |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
Vehicle fitment is not on record for this kit. It is sized around Ford 8.8 inch rear axles that use C-clip eliminators and a 5×4.50/5×4.75 wheel pattern, so the axle housing decides fit.
Standard C-clip axles are not covered, and the axle flange should measure 5.75 inch. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting hardware is included with the pre-assembled rotors. The kit needs C-clip eliminator axles, so a standard C-clip axle must be converted before fitting. Drag race pads change braking behavior, so have the system inspected before its first run.
What’s included
Four S4 calipers, two-piece rotors pre-assembled with stainless hardware, and the mounting hardware.
Not included: brake hoses, lug nuts, a front rotor and a park brake.















