Overview
The Baer Brakes 4262152B is a Pro Plus 14.0 inch rear brake kit for Ford 9 inch rear ends with Torino (late big) bearing housing ends, built for 5×4.50 and 5×4.75 wheel bolt patterns with 5 lugs. It pairs six-piston fixed calipers with two-piece slotted, drilled rotors and a park brake shoe housed in Baer’s backing plate, finished in black. It suits owners upgrading the rear brakes on an axle with this bearing housing style.
Baer’s backing plate does double duty: it mounts the caliper and encloses a one-piece park brake shoe, so the parking brake shares one assembly with the service brake. The rotors come pre-assembled with NAS fasteners, which supports heat control and consistent bite. Confirm your axle housing matches the Torino (late big) bearing flange before ordering.
Key features
- Six-piston (6P) fixed caliper with stainless steel pistons and staggered pistons to even out pad wear.
- Dual seals rated for dust, weather and pressure, plus stainless noise suppression clips.
- Two-piece 14.0 inch vented rotor, slotted, drilled and zinc plated, with a billet aluminum hat.
- Caliper body CNC machined from forged or billet aluminum, with a powder coated finish.
- Backing plate that serves as the caliper mount and houses a one-piece park brake shoe.
- Stainless braided hoses and all mounting hardware included.
- Uses the D0731 FMSI pad type.
Before you buy
Rear brake upgrades on a Ford 9 inch are easier when the axle housing is identified first. The bearing housing style determines the flange, and the flange determines which kit can bolt on. Measure or verify the housing before ordering, and confirm the wheel bolt pattern and clearance as well.
A larger rotor and six-piston caliper change the load on the rest of the rear end, so the axle bearings, brake lines and parking brake linkage should be inspected at the same time. Brake fluid should be fresh, and the hoses should be checked for cracking or chafing where they route past suspension components.
Parking brake cables must be sourced separately, so plan that purchase before installation to avoid a rear end that cannot hold the vehicle.
- Verify the axle flange type before buying
- Check wheel clearance with the template
- Inspect parking brake cables and linkage
- Bleed the system after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262152B |
| UPC | 844165022060 |
| Sold as | Kit |
| Caliper | 6P six-piston fixed, black |
| Caliper body | CNC machined aluminum (forged or billet), powder coated |
| Rotor outside diameter | 14.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor surface | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Pad FMSI number | D0731 |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 lug |
| Minimum wheel diameter | 18.0 inch |
| Axle flange | Ford 9 Inch Torino/Late Big Bearing |
| Park brake shoe | Included (1-piece) |
| Park brake cables | Not included |
| Hose material | Steel braided, DOT approved |
| Front rotor | Not included |
| Lug nuts | Not included |
| Emission code | 6 |
| Grade | Performance |
| Template | Q082P |
| Country of origin | US |
Vehicle fitment
No vehicle fitment list is available for this kit. It is designed for Ford 9 inch rear axles with Torino (late big) bearing housing ends and a 5×4.50/5×4.75 wheel pattern with 5 lugs. Wheel styles vary, so check the Q082P template against the wheel you plan to run. Most 18 inch or larger wheels clear without spacers.
The early big bearing and small bearing Ford 9 inch housings are different flange types and are not covered by this Torino kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables are not included, so the rear parking brake needs cables sourced separately. Stainless braided hoses and hardware come with the kit, while lug nuts and the front rotor do not. Check wheel clearance with the template before mounting, and have a qualified installer complete the work, since rear brakes are safety-critical.
What’s included
The kit includes the 14.0 inch two-piece rotors, six-piston calipers, the one-piece park brake shoe in the backing plate, stainless braided hoses and all mounting hardware.
Not included: park brake cables, lug nuts and the front rotor.















