Overview
The Baer Brakes 4262150B is a black Pro Plus 14.0 inch rear brake kit for Ford 8 inch and 9 inch small bearing housing ends. It pairs a fixed 6-piston caliper with a 2-piece slotted and drilled rotor on a 5×4.50/5×4.75 bolt pattern, giving a rear disc setup with an integrated park brake.
Abutments and noise suppression clips are stainless. The zinc-plated rotor sits on a billet aluminum hat and arrives with stainless hardware. The 14 inch Pro Plus suits most wheels 18 inch or larger, but wheel designs differ, so compare the Q082P template with the chosen wheel before fitting.
Key features
- Black-finished fixed six-piston caliper
- Abutments and noise suppression clips are stainless, as are the pistons
- Staggered pistons designed to help even out pad wear
- Dual seal design for dust, weather and pressure
- Zinc-plated slotted and drilled rotor on a billet aluminum hat
- Steel braided brake hoses with DOT approval
- CNC machined components of US sourced forged or billet aluminum, made in Phoenix, AZ
Keeping the rear brakes healthy
Rear disc brakes on a live axle see heat and road grime in a different way than front brakes do, so routine checks matter. Each time the wheels come off, look over the pads, rotor surface and caliper slides. Clean the caliper with a damp cloth after muddy runs and avoid harsh solvents that can dull the finish. Pad wear and rotor condition can differ from one side of the axle to the other, so inspect both sides each time.
Park brake function deserves the same attention. Because the shoe lives inside the backing plate, a drop in parking hold or a dragging wheel usually means adjustment or wear inside the assembly. A technician can inspect it without disturbing the hydraulic side of the system, and any replacement cable should match the shoe design.
- Inspect braided hoses for chafing and bulges
- Torque lug nuts after the first few drives
- Wipe rotor faces clean before fitting new pads
- Check pad thickness at every wheel service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262150B |
| UPC | 844165021964 |
| Kit type | Kit |
| Rotor diameter | 14.0 inch |
| Rotor type | 2-piece, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Rotor construction | Vented |
| Rotor thickness | 1.15 |
| Caliper | 6-piston, 6P, fixed |
| Caliper color | Black |
| Axle position | Rear |
| Axle flange | Ford 8 inch/9 inch small bearing |
| Bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 |
| Minimum wheel diameter | 18.0 inch |
| Pad type | D0731 (FMSI) |
| Template | Q082P |
| Hose material | Steel braided, DOT approved |
| Park brake | Included |
| Park brake cables | Not included |
| Front rotor | Not included |
| Lug nuts | Not included |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
The rear axle needs Ford 8 inch and 9 inch small bearing axle flanges and a 5×4.50/5×4.75 bolt pattern. Measure the axle flange and bolt pattern on your rear axle before ordering.
Compare the Q082P template with your wheel to check clearance on this 14 inch system. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This kit does not include park brake cables, so cables that match the integrated park brake shoe assembly need to be supplied separately. Stainless hardware comes already installed on the rotors. A qualified technician should check the caliper, hose and park brake routing and road test the brakes before regular use.
What’s included
The kit includes the black 6-piston caliper, the 2-piece rotor on its aluminum hat, the backing plate with park brake shoe assembly, steel braided hoses and stainless hardware for the 14.0 inch rear system.
Not included: park brake cables, lug nuts and the front rotor.















