Overview
The Baer Brakes Pro Plus rear brake system, part number 4302249R, is a 14-inch two-piece slotted and drilled rear disc brake kit with a red 6-piston caliper. It is built for rear axle housings with a GM 10/12 bolt small car pattern flange that use C-clip axles, on a 5 on 4.75 inch and 5 on 5 inch bolt circle.
The kit uses a six-piston floating caliper that clamps a rotor with an iron body and billet aluminum hat. The rear backing plate serves as the caliper mount and also houses a one-piece park brake shoe assembly, so the park brake sits inside the same unit. Wheel fit cannot be guaranteed for every wheel style, so compare the wheel against template Q110P before mounting.
Key features
- Six-piston, 6P floating caliper in red
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to reduce uneven pad wear
- Dual dust, weather and pressure seals
- Two-piece slotted, drilled and zinc-plated rotor with billet aluminum hat
- Backing plate that carries a one-piece park brake shoe assembly
- Stainless braided brake hoses, DOT approved, with stainless hardware
- Uses the popular D0731 brake pad type
Choosing a rear brake upgrade
A rear disc upgrade changes how the axle handles braking, so the rotor, caliper and backing plate should be treated as one assembly. Before buying, measure the axle flange and confirm it is a C-clip design, since a 10/12 bolt small car pattern flange and a larger housing use different hardware. Wheel clearance matters too, because a larger rotor and caliper leave less room behind the spokes.
Rear park brake function is worth planning early. When the shoe assembly sits in the backing plate, the cables and lever linkage must still connect correctly, so compare the setup with the old parts before removing anything. Brake lines, pads and hardware are often replaced at the same time, which keeps pedal feel consistent across the axle.
- Measure the axle flange and bolt circle before ordering
- Compare the wheel to the template before mounting
- Plan for park brake cables and lug nuts
- Bed in new pads before heavy braking
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302249R |
| UPC | 844165043041 |
| Rotor diameter | 14.0 inch |
| Rotor thickness | 1.15 |
| Rotor type | 2-piece, vented |
| Rotor surface | Slotted, drilled and zinc plated |
| Rotor material | Iron with aluminum hat |
| Caliper | 6-piston floating, red |
| Pad type | FMSI D0731 |
| Brake hose | Steel braided, DOT approved |
| Park brake | Included |
| Park brake cables | Not included |
| Axle flange | GM 10/12 bolt C-clip, small car pattern |
| Wheel bolt pattern | 5×4.75/5×5.00, 5 lug |
| Lug nuts | Not included |
| Minimum wheel diameter | 18.0 inch |
| Template | Q110P |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
It is made for GM 10/12 bolt small car pattern rear axles with C-clip axle flanges and a 5×4.75/5×5.00 wheel bolt pattern. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors and hardware are pre-assembled with stainless fasteners. The park brake cables are not included and must be sourced separately before the park brake can be connected. Lug nuts are also not included. Compare the wheel against template Q110P before mounting, and test pedal feel and park brake hold at low speed before driving on public roads.
What’s included
The kit includes the 14-inch two-piece rotors, the 6-piston calipers, the rear backing plates with the one-piece park brake shoe assembly, stainless braided hoses and stainless hardware.
Not included: park brake cables and lug nuts.















