Overview
The Baer Brakes 4262691R Extreme Plus is a rear brake system with a red 6S caliper, built for 2009–2011 Ford F-150 trucks with 6-lug hubs in 2WD or 4WD. Its 15 inch rotor is paired with a park brake shoe assembly.
Baer also names Ford Raptor 10-11 in the applications for this system. The minimum wheel diameter is 19.0 inch, so wheels of that size or larger are needed. The park brake shoe assembly sits inside Baer’s backing plate, which also mounts the caliper.
Key features
- Red-finished one-piece monoblock 6-piston 6S caliper.
- CNC machined from US sourced 2618 aluminum forging.
- Staggered pistons to minimize uneven pad wear.
- Dual seals for dust, weather and pressure.
- Stainless steel pistons, abutments and noise suppression clips.
- Two-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat.
Caring for the rear system
A red powder coat protects the caliper body from road grime, but it still needs regular attention. Brake dust and road salt can build up around the backing plate and caliper ears. Rinsing the assembly after wet or dusty runs and wiping it down with mild soap and water keeps the finish clean and makes wear easier to see.
Care also covers the moving parts. Check the caliper for fluid seepage at the seals, inspect the dust and weather boots for tears, and make sure the pads slide freely in their guides. Staying ahead of these checks helps the rear system brake evenly and keeps the park brake shoes working as intended.
- Rinse off dust and salt regularly
- Avoid harsh solvents on the powder coat
- Check seals and boots at each service
- Keep pad guide pins clean and lubricated
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262691R |
| UPC | 844165049852 |
| Sold as | Kit |
| Caliper | 6S, 6-piston, floating, one-piece monoblock |
| Caliper color | Red |
| Rotor outside diameter | 15.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor thickness | 1.25 |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Pad FMSI number | D1247 |
| Template | N125U |
| Drive | 2WD and 4WD |
| Applications | Ford F150 09-11, Ford Raptor 10-11 |
| Lug count | 6 lug |
| Wheel bolt pattern | 6x135mm |
| Minimum wheel diameter | 19.0 inch |
| Grade | Performance |
| Park brake | Included |
| Park brake cables | Not included; original cables reused |
| Brake hoses | Original hoses reused |
| Lug nuts | Not included |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list covers 2009–2011 Ford F-150 only. Baer’s applications line also names Ford Raptor 10-11.
Models and generations outside this list are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Compare the kit to your wheel with template N125U, since Baer says fit cannot be guaranteed across all wheel styles.
- Reused original hoses and park brake cables should be checked during installation.
- Brackets and hardware come with the kit, and the rotor is pre-assembled with stainless hardware.
Have a qualified technician verify the park brake conversion before the truck is driven.
What’s included
Red 6S monoblock caliper, pre-assembled two-piece rotor with stainless hardware, the park brake shoe assembly in the backing plate, and brackets and hardware.
Not included: lug nuts and park brake cables, which are reused from the original equipment.














