Overview
The Baer Brakes 4262276R is a red SS4 rear brake kit for Ford 8.8 Inch C-Clip rear ends. It uses a 12.0 Inch 1-piece rotor, a 3.25 Inch axle standoff and a red S4 caliper, with a minimum wheel diameter of 16.0 Inch. The rotor is vented, slotted, drilled and zinc plated.
The kit’s backing plate holds the park brake shoe assembly, so the park function is built into the rear hub area, but the park brake cables are not supplied with the kit. Stainless braided hoses are included, and the pads are the DR1 or HB100 type with semi-metallic friction material.
Key features
- Red powder coated S4 caliper with four pistons
- Caliper body machined from forged or billet aluminum with CNC equipment
- Dual seals against dust, weather and pressure
- Hard anodized pistons paired with stainless abutments
- 12.0 Inch 1-piece slotted, drilled, zinc plated rotor
- Park brake shoe assembly integrated into the backing plate
- Steel braided hoses, DOT approved
- Manufactured in Phoenix, Az
Caring for the red caliper
The red powder coated finish on the S4 caliper is a surface layer, so it needs gentle cleaning. Harsh solvents and abrasive pads can dull the coating, and road salt can leave staining if it sits on the caliper body. A soft brush and mild cleaner are enough for routine washing of the rear assembly.
Heat from braking can change the look of any coating over time, so inspect the caliper after hard use. Check for chips near the bridge bolts and any sign of fluid seepage around the pistons. Early attention keeps the finish and the seals in better condition.
- Rinse the caliper after winter road use
- Use a soft brush rather than abrasive pads
- Look for fluid weeping around the piston seals
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262276R |
| UPC | 844165038016 |
| Caliper | S4, 4-piston |
| Caliper type | Floating |
| Caliper color | Red |
| Rotor outside diameter | 12.0 Inch |
| Rotor thickness | 1.020 Inch |
| Rotor type | 1-piece, vented |
| Rotor material | Iron |
| Surface | Slotted, drilled and zinc plated |
| Wheel bolt pattern | 5×4.50 |
| Minimum wheel diameter | 16.0 Inch |
| Axle flange | Ford 8.8 Inch |
| Axle standoff | 3.25 Inch |
| Hose material | Steel braided, DOT approved |
| Park brake | Yes (shoe assembly included) |
| Park brake cables | Not included |
| ABS tone ring | No |
| Pad type | DR1 or HB100 (FMSI DR1), semi-metallic, performance grade |
| Template | S113E |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
A 3.25 Inch axle standoff on Ford 8.8 Inch C-Clip rear ends is the design this kit covers. Match the axle and standoff before choosing it.
Axle flanges and standoffs that differ from these are outside the described design. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Park brake cables and lug nuts are not included and need to come from elsewhere. Confirm the axle standoff measures 3.25 Inch before assembly. Have the work checked by a qualified brake technician.
What’s included
Red S4 4-piston caliper, 12.0 Inch one-piece rotor, backing plate with park brake shoe assembly, and steel braided hoses.
Not included: park brake cables and lug nuts.












