Overview
The Baer Brakes 4262325B is a black rear disc brake kit from the SS4 Plus family, made for Ford 9 inch rear ends with Torino (Late Big) bearing housing ends. Each side uses an 11.0 inch two-piece rotor clamped by a four-piston S4 caliper, and the kit bolts to a 5 on 4.50 or 5 on 4.75 pattern. The minimum wheel diameter is 15.0 inch, and it suits most 15 inch or larger wheels.
The kit carries its own brackets, pre-assembled rotors with stainless hardware, and stainless braided hoses. No park brake is included, and lug nuts are not part of the package. Since Baer cannot promise fit into every wheel style, verify the S125A template against the wheel you intend to use.
Key features
- Four-piston S4 caliper with hard anodized aluminum pistons and stainless steel abutments
- Billet or forged aluminum components, CNC machined in the US with a powder coated finish
- Dust, weather and pressure seals, with the dust and weather seals rated T compliant.
- Two-piece slotted, drilled, zinc-plated vented rotor with a billet aluminum hat
- Noise suppression clips included with the pads
- Mounting brackets, stainless braided hoses and hardware in the kit
- Uses the DR1-C pad type
Before you buy
Rear disc conversions change how wheels clear the caliper and how the rear axle carries braking load, so check wheel offset, tire size and clearance before buying. Measure the inside of your wheels because a larger rotor can reduce clearance even when the bolt pattern matches. Look at the rest of the brake system as well, since master cylinder size, proportioning and pedal feel all affect how a rear kit performs on the road and on the trail.
Rear pads, rotors and hoses wear at different rates, so plan to inspect all of them together. Keep a spare set of pads on hand if the vehicle sees hard use, long descents or frequent towing. When the system is opened for service, bleed the lines fully and recheck the pedal before returning the vehicle to regular driving.
- Check wheel offset and tire clearance around the caliper
- Confirm the parking brake arrangement before mounting
- Keep brake fluid fresh to protect the calipers
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262325B |
| UPC | 844165048923 |
| Caliper | S4, four-piston, fixed |
| Caliper color | Black |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.020 inch |
| Rotor construction | Vented, two-piece |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled and zinc plated |
| Pad FMSI number | DR1-C |
| Minimum wheel diameter | 15.0 inch |
| Lug count | 5 lug |
| Bolt pattern | 5×4.50/5×4.75 |
| Axle flange | Ford 9 inch Torino/Late Big bearing |
| Brake hose | Steel braided, DOT approved |
| Park brake | No |
| Lug nuts included | No |
| Sold as | Kit |
| Template | S125A |
| Country of origin | US |
Vehicle fitment
The kit is matched to the Ford 9 inch axle with Torino (Late Big) bearing housing ends. Confirm your vehicle’s year, model and trim before ordering, and compare your housing ends and wheel clearance with the S125A template.
Ford 9 inch Small Bearing housing ends are a different flange and fall outside this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotors arrive pre-assembled with stainless hardware, installation centers on the brackets, calipers and axle-side mounting. No park brake is supplied, so a separate parking brake arrangement is needed if your vehicle requires one. Bleed the brake lines after mounting and confirm firm pedal travel before driving.
What’s included
Black S4 calipers, two-piece rotors with pre-assembled NAS high grade stainless hardware, mounting brackets, stainless braided hoses and hardware.
Not included: lug nuts, park brake, front rotor.















