Overview
The Baer Brakes 4302299R is a red Pro rear brake system for the 2006–2009 Chevrolet Trailblazer SS in both 2WD and AWD form, and it is designed to keep the factory rear end. A 6P six-piston caliper squeezes a 14-inch slotted and drilled rotor, and the caliper carries a red powder coated finish.
Stainless steel pistons, abutments and noise suppression clips are used throughout the caliper, and the staggered piston layout is intended to even out pad wear. The hubs are put together before shipping, with bearings and races installed and packed with Redline synthetic grease.
Key features
- Two-piece 6P caliper with six pistons, assembled in Phoenix, Arizona
- Machined on CNC equipment from US-sourced forged or billet aluminum stock
- Red powder coated finish
- Stainless steel pistons and abutments with noise suppression clips
- Staggered piston layout to limit uneven pad wear
- Dual seals guarding against dust, weather and pressure
- Slotted, drilled, zinc-plated one-piece rotor
- Hubs pre-assembled with Redline synthetic grease packed in
Keeping the red finish
A powder coated caliper faces road salt, grit, heat cycling and washing, so the finish benefits from regular cleaning. Rinse the caliper after winter driving and wipe it with a mild soap and water solution. Harsh solvents and abrasive pads can dull or lift coatings, so stick with gentle cleaners and soft brushes around the piston area.
Paint on a brake caliper sees more heat than most body panels, so any touch-up should use a high-temperature product. Keep paint off the pistons, seals and friction surfaces. Inspect the finish during each pad change, looking for chips near the mounting bolts where corrosion often starts.
- Rinse the caliper after exposure to road salt
- Use mild soap rather than solvent-based cleaners
- Keep paint off the rotor friction surface
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4302299R |
| UPC | 844165043478 |
| Package type | Kit |
| Caliper | 6P, six-piston |
| Caliper color | Red |
| Rotor diameter | 14 inch |
| Rotor construction | 1-piece |
| Rotor material | Iron |
| Rotor surface | Slotted, drilled, zinc plated (SDZ) |
| Axle | Rear |
| Drive | 2WD, AWD |
| Minimum wheel diameter | 18.0 inch |
| Box count | 2 |
| Hose material | Re-uses OE hoses |
| Park brake | Yes |
| Template | Q233P |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
The fitment covers 2006–2009 Chevrolet Trailblazer (SS), in 2WD and AWD drive. The kit has an 18.0 inch minimum wheel diameter and fits stock SS wheels.
Other GM models and Trailblazer years outside 2006–2009 are not covered by this fitment entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hubs come pre-built, installation mainly means attaching the hub and caliper assemblies to the control arms. The existing OE hoses are reused rather than replaced, so check them for wear before reinstalling. Have a qualified technician install this brake system.
What’s included
The kit includes the 6P caliper, the 14-inch rotor and the hubs with bearings and races installed. The park brake is included, and the box count is 2.
Not included: lug nuts and the front rotor.














