Overview
The Baer Brakes 4301299B is a Pro front brake kit for the 2006–2009 Chevrolet Trailblazer SS, with black 6-piston calipers and 14 inch slotted, drilled rotors. It is made for 2WD and AWD Trailblazer SS vehicles and works with the OE spindles and hubs.
Baer builds the hub assemblies in-house before they are sent out, installing the bearings and races and packing them with Redline synthetic grease. The 6-piston calipers are CNC machined from forged or billet aluminum, powder coated black, and built in Phoenix, Az.
Key features
- Black powder-coated 6-piston caliper
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 14 inch slotted and drilled zinc-plated rotor on an iron and aluminum hat design
- Hub bearings packed with Redline synthetic grease at assembly
Pads and rotor wear
Black calipers show brake dust less than lighter finishes, but dust still builds up on the rotor face and pads. Watching pad thickness matters more than watching the caliper. Uneven wear on one side can point to a sticking slide pin or a seized piston, which is worth inspecting before the wear spreads.
Slotted, drilled rotors help shed heat and gas, yet they can crack or thin over time. Check the rotor surface for heat cracking, deep grooves and a raised lip at the outer edge. Replace pads and rotors as a pair when wear is uneven, since mismatched surfaces wear unpredictably.
- Look for a lip on the outer edge of the rotor
- Check for pulsation through the pedal
- Clean debris from the rotor face before pad changes
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4301299B |
| UPC | 844165038733 |
| Sold as | Kit |
| Caliper | 6-piston (6P), black |
| Rotor diameter | 14 inch |
| Rotor style | Slotted, drilled |
| Rotor material | Iron with aluminum hat |
| Front rotor included | Yes |
| Lug nuts included | No |
| Wheel bolt pattern | 6×5.00 |
| Minimum wheel diameter | 18.0 inch |
| Hoses | Reuses OE hoses |
| Template | Q077P |
| Country of origin | US |
Vehicle fitment
It covers the 2006–2009 Chevrolet Trailblazer (SS). The kit suits both 2WD and AWD versions of the Trailblazer.
Years outside 2006–2009 and GM models other than the Trailblazer SS are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The hubs arrive with bearings packed, so the job is mainly mounting the assembly to the control arms and reusing the OE hoses. Lug nuts are not included, so supply nuts suited to the 6×5.00 bolt pattern.
Baer does not guarantee fit with every aftermarket wheel. Compare the wheel you plan to run with template Q077P, and confirm it meets the 18.0 inch minimum wheel diameter. Brake installation should be done by a qualified mechanic.
What’s included
The kit includes the black 6-piston front calipers, the 14 inch front rotors, and hubs with bearings and races installed. The vehicle’s OE hoses are reused.
Not included: Lug nuts.













