Overview
The Baer Brakes 4262688R is a rear Extreme Plus brake system for the 2012-2018 Ford F-150 and Ford Raptor, finished in red. It mounts a 1-piece Monoblock, 6-piston, 6S caliper to a 15-inch, 2-piece slotted, drilled and zinc-plated rotor, built for 2WD and 4WD trucks that keep the factory park brake setup.
The kit uses the D1247 brake pad type. Rotors arrive pre-assembled with NAS high grade stainless hardware, and all brackets and hardware are included. The 15-inch system is designed to fit most 19-inch or larger wheels. Because wheel designs vary, compare the system with the N125U template against the wheel you plan to run.
Key features
- 1-piece Monoblock, 6-piston, 6S caliper, manufactured in Phoenix, AZ.
- CNC machined from 2618 aluminum forging.
- Powder-coated caliper finish in red.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered pistons designed to minimize uneven pad wear.
- Dual seals for dust, weather and pressure.
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat.
- Rotors pre-assembled with NAS high grade stainless hardware.
Caring for a monoblock rear kit
Regular checks keep a monoblock rear system performing as it should. Look at the caliper body for leaks around the bleed screw and the piston boots, and check that the pad springs and retaining clips are seated. Stainless pistons resist corrosion well, but the caliper bore still needs clean fluid and occasional inspection for pitting.
Wheel fitment is worth rechecking after any tire change or wheel swap, because a different offset can change caliper clearance. Lug torque should be checked after the first drives with new rotors and after any wheel removal. Keep the rotor faces free of oil and grease, since contamination reduces friction and shortens pad life.
- Check for fluid seepage around the piston seals
- Retorque lug nuts after the first drives
- Replace pads before the friction material wears through
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262688R |
| UPC | 844165047469 |
| Caliper | 6S, 1-piece Monoblock |
| Caliper color | Red |
| Caliper type | Floating, 6 pistons |
| Caliper material | CNC machined 2618 aluminum forging |
| Caliper finish | Powder coated |
| Axle | Rear |
| Drive | 2WD, 4WD |
| Rotor type | 2-piece slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor outside diameter | 15.0 Inch |
| Rotor thickness | 1.25 |
| Rotor construction | Vented |
| Min wheel diameter | 19.0 Inch |
| Wheel bolt pattern | 6x135mm |
| Lug count | 6 Lug |
| Pad FMSI number | D1247 |
| Template | N125U |
| Grade | Performance |
| Emission code | 6 |
| Hoses | Reuses OE hoses |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It fits the 2012-2018 Ford F-150. Applications also cover the Ford F150 12-18 and Ford Raptor 12-18, for 2WD and 4WD drive.
Other F-150 generations and model years outside 2012-2018 are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brackets and all hardware are included, and the rotors arrive pre-assembled, so the rotor hardware needs no separate purchase. The OE hoses are reused. Lug nuts are not included, so have six lug nuts ready for the 6x135mm pattern. Check wheel clearance with template N125U before fitting wheels, since the system is designed around 19-inch or larger wheels. Brake work should be done by someone experienced with disc brake systems.
What’s included
The kit includes the 6S Monoblock caliper in red, two-piece slotted, drilled and zinc-plated rotors with billet aluminum hats, pre-assembled with NAS high grade stainless hardware, plus all brackets and hardware. The brake pad type is D1247.
Not included: Lug nuts.














