Overview
The Baer Brakes 31482-1303 is a front Claw rotor and pad combo kit for the 2007–2018 Toyota Tundra and the 2008–2018 Toyota Sequoia. The package pairs slotted, drilled and zinc-plated cast iron rotors with Baer Claw ceramic performance street pads for a matched front axle upgrade.
This kit is a direct bolt-on swap that requires nothing to be modified on the truck. It suits drivers who want braking performance balanced against road comfort for daily use. It covers the front axle only, and brake lubricant is sold separately.
Key features
- Slotted, drilled and zinc-plated rotors for a brilliant appearance
- Baer Claw ceramic street pads for daily driving
- Direct bolt-on swap with no modifications
- One-piece full cast rotor design
- Directional brake surface
- Stainless-steel abutment clips and noise suppression hardware
Front hub and caliper care
The front hub is the mounting face that holds the rotor true, so any rust, dirt or old corrosion on it can cause vibration after the job is finished. Clean the hub face and the rotor’s centre bore with a wire brush, then check that the rotor sits flat against it. Front brake work is also a good moment to check the caliper and its slide pins.
On a truck that tows or sees steep grades, front brakes take a lot of heat. Let new pads and rotors bed in with several moderate stops before heavy loading. Keep lubricant on the caliper contact points only, since lubricant on the friction face can reduce grip. Recheck the wheel nuts after the first short drive.
- Wire brush the hub and rotor mounting face
- Confirm the rotor sits flat before fitting the wheel
- Lubricate caliper contact points, not friction surfaces
- Recheck wheel nut tightness after a short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 31482-1303 |
| UPC | 844165052968 |
| Sold as | Kit |
| Axle | Front |
| Rotor material | Cast iron |
| Rotor construction | One piece, full cast |
| Rotor surface | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Pad friction material | Ceramic |
| Grade | Premium |
| Abutment clips included | Yes |
| Brake lubricant included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
Fitment covers the 2007–2018 Toyota Tundra and the 2008–2018 Toyota Sequoia. The Toyota Land Cruiser and Lexus LX570 named in the product name are not part of that fitment.
The Land Cruiser and LX570 named in the product name are not covered by the listed fitment, and other models are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The abutment clips and noise suppression hardware come in the box, so the pad mounting points are accounted for. Because this is a front kit, the work happens at the steering knuckle side of the truck and should be planned with the factory rotors removed. Lubricant for the caliper contact points is not included, so buy it before starting. If front disc brake work is new to you, use a qualified technician.
What’s included
The package holds a pair of front rotors, a set of Baer Claw ceramic performance street pads and stainless-steel abutment and noise suppression hardware.
Not included: brake lubricant.
