Overview
The Baer Brakes 4261397S is a front Extreme disc brake kit for the 2010–2026 Ford F-150, covering 2WD and 4WD trucks including the Raptor. It uses a six-piston 6S monoblock caliper in silver, clamped to a 15 inch one-piece slotted, drilled rotor with a zinc-plated surface.
The one-piece iron rotor has a rotor thickness of 1.18 and a 6x135mm wheel bolt pattern with a 19.0 inch minimum wheel diameter. The factory brake hoses are re-used, and the mounting brackets and hardware are included.
Key features
- One-piece monoblock 6S caliper with six pistons, manufactured in Phoenix, AZ.
- Caliper body CNC machined from US-origin 2618 aluminum forging, with a powder coated finish.
- Stainless steel pistons, abutments and noise suppression clips.
- Staggered pistons help minimize uneven pad wear.
- Dual seals guard against dust, weather and pressure.
- One-piece slotted, drilled, zinc-plated iron rotor.
- Mounting brackets and hardware included.
One-piece versus two-piece rotors
A one-piece rotor is cast as a single unit, so the friction surface and hat share the same iron body. This construction keeps the parts simple to service and avoids a separate hat that must be kept aligned and fastened. It also means the whole rotor is replaced when the surface wears below its limit.
Two-piece rotors separate the friction ring from an aluminum hat, which can change how heat moves through the assembly and how the rotor weighs at the hub. Those differences matter most when choosing between rotor types. Keep the rotor family consistent with the caliper and pad set rather than mixing parts from different systems.
- Measure rotor thickness before and after pad changes
- Check the rotor surface for heat cracks and scoring
- Replace pads and rotor together for even bedding
- Choose pads rated for the rotor and caliper setup
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261397S |
| UPC | 844165035756 |
| Kit type | Kit |
| Axle | Front |
| Drive | 2WD, 4WD |
| Applications | Ford F150 10-26, Raptor included |
| Caliper | 6S, 1-piece monoblock, 6 pistons, fixed |
| Caliper color | Silver |
| Caliper body | CNC machined from 2618 aluminum forging, powder coated |
| Pad type | D1247 (FMSI) |
| Rotor type | 1-piece, slotted, drilled, zinc plated |
| Rotor outside diameter | 15.0 inch |
| Rotor thickness | 1.18 |
| Rotor construction | Vented, 1-piece, iron |
| Front rotor included | Yes |
| Lug count | 6 |
| Wheel bolt pattern | 6x135mm |
| Minimum wheel diameter | 19.0 inch |
| Hose material | Re-uses factory hoses |
| Lug nuts included | No |
| Template | N063U |
| Country of origin | US |
Vehicle fitment
The fitment on record for this front kit is the 2010–2026 Ford F-150, covering 2WD and 4WD trucks, including the Raptor.
Ford trucks outside the F-150 line, and F-150 years before 2010, are not part of this fitment. Check your model year and drivetrain before you order.
Installation notes
Brackets and hardware are supplied with the kit. Baer cannot guarantee fit into every wheel style, so compare the N063U template with your wheel before mounting. Installers should have disc brake experience before starting this job.
What’s included
The kit includes the 6S monoblock front caliper with a 15 inch one-piece rotor, plus the mounting brackets and hardware.
Not included: lug nuts. The kit re-uses the factory brake hoses rather than supplying new ones.














