Select your vehicle

Baer Brakes Claw Brake Pads Rear 19-26 Ram 2500/3500 – D2225

Baer Brakes

Shop Ram 3500 Disc Brake Pads on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Baer Claw rear brake pads, part number D2225, for 2019–2025 Ram 2500 and 2019–2026 Ram 3500 trucks
  • Set of 4 slotted pads with mechanical wear sensor and attached wear indicator
  • Pad shims and stainless steel abutment hardware included
  • Mounting hardware and brake lubricant not included

Description

Overview

The Baer Brakes D2225 is a rear brake pad set from the Baer Claw line for the 2019–2025 Ram 2500 and the 2019–2026 Ram 3500 trucks. Each set holds 4 pads for the rear axle and carries FMSI number D2225 alongside Baer part number D2225.

The pads use a premium high friction compound designed for consistent wear, low rotor wear, and minimal noise and dust in daily driving. Check the friction material printed on the package before fitting, since it determines the pad’s braking character and must match your expectations.

Key features

  • OE replacement pads designed for consistent wear with minimal noise and dust
  • Premium high friction compound with long pad life and low rotor wear
  • Balance of braking performance and road-going comfort for daily drivers
  • Stainless steel abutment and anti-rattle hardware included with most applications
  • Slotted pads with a mechanical pad wear sensor and attached wear indicator
  • 4 pads per set, for the rear axle

Choosing and bedding in pads

Rear brake pads wear at different rates depending on how a truck is used. Towing, hauling and frequent stop-and-go driving all increase friction heat and pad wear. Pads wear evenly only when the caliper slide pins move freely and the hardware sits correctly, so the rear brakes should be inspected whenever pads are changed.

The mechanical wear sensor on this set is designed to squeal or scrape when the pad lining reaches its limit, giving early notice before the backing plate contacts the rotor. Inspect the rotor surface for grooves or scoring at each pad change, and resurface or replace it if it is worn beyond its service limits. Pads and rotors often wear together, so checking both helps keep braking consistent.

  • Check caliper slide pins for free movement before fitting
  • Look for uneven pad wear across the axle
  • Clean abutment surfaces before installing new pads
  • Bed in new pads gradually before towing

Specifications

Brand Baer Brakes
Part number D2225
FMSI number D2225
UPC 810215398218
Supplied as Set
Pads per set 4
Axle Rear
Friction material Semi-metallic
Grade type Premium
Emission code 6
Backing plate color Black
Slotted Yes
Pad wear sensor Included, mechanical type
Wear indicator attached Yes
Pad shims included Yes
Abutment clips included Yes
Mounting hardware included No
Brake lubricant included No
Country of origin USA

Vehicle fitment

The manufacturer fitment list names the 2019–2025 Ram 2500 and the 2019–2026 Ram 3500 trucks for rear applications. Front-axle pads are a different part and are not covered by this set.

Other Ram models, such as the 4000, are not covered by this set. Confirm fit for your vehicle’s year, model and trim before ordering.

Installation notes

Keep the abutment clips and shims in place when fitting, and make sure the hardware moves freely so the pads release fully after each stop. Inspect the parking brake mechanism and caliper slide pins while the rear brakes are open. Break in the new pads gently before towing heavy loads, and test pedal feel at low speed before normal driving.

What’s included

4 rear pads with pad shims, stainless steel abutment clips and noise suppression hardware for most applications, plus a mechanical pad wear sensor.

Not included: mounting hardware and brake lubricant.

Specification

Shipping weight 6 lbs
Package dimensions 13 × 4.25 × 9.5 in
brands

Sold as

Set

Pads per set

4

Country of origin

USA

Fitment

VehicleYearsTrims
Ram 25002019–2025All
Ram 35002019–2026All

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the D2225 rear pad set fit the Ram 2500 and Ram 3500?

Yes. The manufacturer fitment list names the 2019–2025 Ram 2500 and the 2019–2026 Ram 3500 for rear applications. Confirm your vehicle's year, model and trim before installing, since the list is the reference for coverage.

Is the D2225 a front or rear brake pad?

It is a rear pad. Each set contains 4 pads for the rear axle, plus pad shims, stainless steel abutment hardware and a mechanical wear sensor. Front-axle pads are a different part and are not included.

What friction material does the D2225 use?

The D2225 uses a premium high friction compound designed for consistent wear and low rotor wear. Check the friction material printed on the package before fitting, so it matches your braking expectations.

Are mounting hardware and brake lubricant included?

No. The set includes 4 pads, pad shims, abutment clips and a mechanical wear sensor with its indicator. Mounting hardware and brake lubricant are not included, so have compatible products ready before installing.

How can I tell when rear pads need replacing?

Replace them when the wear sensor squeals or scrapes, when the friction material looks thin, or when braking feels less consistent. Inspect the pads and rotor surfaces at each rear service, and check that the caliper slide pins move smoothly while the wheels are off.

Should rear rotors be checked when new pads are fitted?

Yes. Inspect the rotor surface for grooves, scoring or uneven wear whenever new pads are fitted. Worn rotors can shorten pad life and cause vibration, so resurface or replace them when they fall outside their service limits.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 3500 Disc Brake Pads on Amazon