Overview
The Baer Brakes 6910992 is a left-side, 1-piece tall hat replacement brake rotor with a slotted, drilled and zinc-plated surface and a 13.000 inch outside diameter. It has a 0.810 inch nominal thickness, a vented cast iron body and no drum in the hat, and it is used in select Baer Brake systems.
The curved vanes aid cooling, and the rotor is dynamically balanced for vibration-free running. The castings are full cast in one piece. The rotor is directional and sold individually, so match it to the left side of the vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Slotted, drilled and zinc-plated friction face
- Tall hat style with no drum in the hat
- Curved vane design intended for cooling
- Dynamically balanced for vibration-free running
- Directional, left-side rotor
- Full cast, one-piece cast iron construction
- Five-lug pattern on a 4.75 inch bolt circle
Tall hat clearance and fit
A tall hat rotor adds a raised hub section, so the hat height affects how the rotor seats against the hub and how the caliper clears the bell. Before ordering, measure the hub face and compare it with the existing rotor’s hat. Any change in hat height can alter wheel clearance, so check the wheel offset and caliper bracket fit before driving.
Because the rotor is directional, the left-side position matters for vane airflow and for matching the pads’ wear pattern. Replace pads and hardware at the same time, and check the caliper slide pins for smooth travel. Look for grooves, heat cracks, or a lip at the friction edge as signs the rotor is worn. Clean the hub face thoroughly before fitting the rotor, since debris can cause lateral runout that shows up as pedal pulsation.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910992 |
| UPC | 844165035695 |
| Outside diameter | 13.000 inch |
| Nominal thickness | 0.810 inch |
| Register diameter | 2.780 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Surface type | Slotted, drilled and zinc-plated |
| Axle | Left |
| Brake surface | Directional |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Application follows the brake system rather than one vehicle, since the rotor is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Because this is a tall hat left rotor for a specific brake system, it should not be treated as a general fit for any five-lug vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and specific to the left side, so verify the side before mounting. It is sold individually, so a matching right-side rotor must be ordered separately when both sides are being serviced.
What’s included
One left-side tall hat replacement rotor, sold as Each.
Not included: the right-side rotor, since each rotor is sold separately.
